Yamaha RX-V3800 Manual De Usuario

■

Use this feature to activate or deactivate the HDMI up-
scaling of the analog video signals input at the composite 
video, S-video and component video jacks so that the up-
scaled analog video signals are output at the HDMI OUT 
jack.
This unit up-scales the analog video signals as follows:

• 480i (NTSC)/576i (PAL) 

→

 480p/576p, 1080i, 

720p, or 1080p

• 480p/576p 

→

 1080i, 720p, or 1080p

• This menu item is not available and hence not visible in the GUI 

menu if “Conversion” is set to “Off” (see page 89).

• This unit does not up-scale the digital video signals input at the 

HDMI input jacks.

■

Use this feature to select the adjustment of aspect ratio for 
analog video signals output at the HDMI OUT jack.

• When “HDMI Resolution” is set to “Through”, you cannot 

make any adjustments to “HDMI Aspect”.

• If the aspect ratio of the input video source is other than 4:3, this 

unit automatically ignores the setting of “HDMI Aspect”.

• When “HDMI Aspect” is set to “Smart Zoom”, the video 

images of the edge of the video monitor are rather stretched.

• When the video signals are input at HDMI IN jacks or the 

signals are input with 720p, 1080i or 1080p of resolution, the 
setting of “HDMI Aspect” does not affect the video signals 
output at the HDMI OUT jack.

■

Use this feature to activate or deactivate the short message 
display function.

The short message display does not appear in the following cases:

– when the component video signals with 720p, 1080i or 1080p 

resolutions are input

– when HDMI video signals are input

■

Use this feature to set the time for which the XM Satellite 
Radio information, iPod or NET/USB menu is displayed 
on the video monitor after you perform a certain 
operation.

■

Use this feature to adjust the vertical and horizontal 
position of the GUI screen.
Control range: –5 (downward/left) to +5 (upward/right)

Does not up-scale any analog video signals.

480p (or 
576p), 1080i, 
720p, 1080p

Up-scales analog video signals to 480p or 576p, 
1080i, 720p, or 1080p of resolution.

Does not make any adjustments to the aspect 
ratio for the HDMI video signal sources.

16:9 Normal

Displays video images with the aspect ratio of 
4:3 on your video monitor with the aspect ratio 
of 16:9. Black stripes appear on the right and 
left sides as a result.

Smart Zoom

Fits video images with the aspect ratio of 4:3 to 
your video monitor with the aspect ratio of 16:9.

Activates the short message display function. 
The contents of the front panel display appear at 
the bottom of the screen each time you operate 
this unit.

Off

Deactivates the short message display function.

Always

Displays the OSD unceasingly during an 
operation.

10sec

Turns off the OSD 10 seconds after you perform 
a certain operation.

Turns off the OSD 30 seconds after you perform 
a certain operation.

4

k

Up

4

n

Down

4

h

Right

4

l

Left