Yamaha DSP-Z11 Manual De Usuario

Press G

SETUP again to exit from the setup mode.

“ERROR” appears in the display window (B) if you press more than one button 
simultaneously.

You can clear all changes made in each function set, such as learned 
functions, macros, renamed control area names and setup remote 
control ID.

■ Clearing function sets (CLEAR)

Press G

SETUP on the remote control using a 

ballpoint pen or similar object.
“SETUP” appears in the display window (4).

Press 9k / n repeatedly to select “CLEAR” and then 
press 9

ENTER.

The remote control enters the clear mode. “CLEAR” and 
“L:the three-letter name of the selected control area” (for 
example, “L:DVD”) appears in the display window (4) 
alternately.

Press 9k / n repeatedly to select the desired clear 
mode.

Press and hold 9

ENTER for about 3 seconds.

When the clearing is successful, “OK” appears in the display 
window (4).

• “NG” appears in the display window (4) if clearing was unsuccessful.
• “ERROR” appears in the display window (4) if you press a button not indicated in 

the respective step, or if you press more than one button simultaneously.

Press G

SETUP again to exit from the setup mode.

■ Clearing a learned function (ERASE)

Press G

SETUP using a ballpoint pen or similar 

object.
“SETUP” appears in the display window (4).

Press 9k / n repeatedly to select “ERASE” and then 
press 9

ENTER.

The remote control enters the learning mode. “ERASE” and 
the name of the currently selected control area appears in the 
display window (4) alternately.

Set the operation mode selector to F

SOURCE and 

then press an input selector button or   (3).
“ERASE” and the name of the selected control area appears in 
the display window (4) alternately.

y

• You can also select the desired control area by pressing 5SELECT l / h 

repeatedly.

• If you want to erase the function learned in the AMP or TV control area, set the 

operation mode selector to FAMP or F TV.

Press 9

ENTER.

“E-KEY” appears in the display window (4).

Press and hold the button you want to clear for about 
3 seconds.
If clearing is successful, “ERASE” and “OK” appears in the 
display window (4).

y

• If you continuously want to clear another function, repeat step 3.
• Once you clear a learned function, the button reverts to the factory setting (or to 

the manufacturer setting if you have set remote control codes).

Press G

SETUP again to exit from the setup mode.

• “NG” appears in the display window (4) on the remote control if clearing was 

unsuccessful.

• “ERROR” appears in the display window (4) if you press more than one button 

simultaneously.

L:DVD (etc.)

(L:Three-digit name of the selected control area) Clears all 
learned functions the respective control area. You can 
change the control area to be cleared by pressing the desired 
input selector button or 

 (3) or 5SELECT l / h 

repeatedly.

L:AMP

Sets all learned functions for controlling the amplifier 
functions to the initial factory settings. Set the operation 
mode selector to FAMP to select this clear mode.

L:TV

Clears all learned functions for TV control area. Set the 
operation mode selector to FTV to select this clear mode.

L:ALL

Clears all learned functions.

M:DVD (etc.)

(M:Name of the selected macro button) Clears the macro 
programmed for the selected macro button (see page 108). 
The assigned macro to the selected macro button reverts to 
the initial factory macro. Press the desired macro button if 
you want to change the macro button you want to clear the 
programmed functions of.

M:ALL

Clears all programmed macros. The assigned macro to the 
selected macro button reverts to the initial factory macro.

RNAME

Set all the name of the control areas to the default settings.

FCTRY

Set all settings of the remote control to the initial factory 
settings.

CLEAR

L:DVD

ERASE

DVD

ERASE

OK