Yamaha DSP-Z11 Manual De Usuario

This unit allows you to configure a multi-zone audio/video system. 
The multi-zone configuration feature enables you to set this unit to 
reproduce separate input sources in the main zone, second zone 
(Zone 2), third zone (Zone 3), and forth zone (Zone 4). You can 
control this unit from the second, third, or forth zone using the 
supplied remote control.

This unit can control the audio and video system in the main zone 
and up to 3 optional zone (Zone 2, Zone 3, and Zone 4), and you can 
use the internal amplifiers or external amplifiers in Zone 2, Zone 3, 
or Zone 4. 
The multi-zone system configuration differs depending on your 
requirements and equipment. Before connecting the speakers and/or 
external amplifiers for the multi-zone configuration, plan the total 
design of your multi-zone system.
When you plan the system, consider the following points:

1. Do you want to use the internal amplifiers of this unit or 

external amplifiers?

2. How many zones do you want to use this unit for?
3. How many channels do you want to use in the main zone?
4. If you use the internal amplifiers for the other zones, you 

cannot use some channels in the main zone in some cases.

5. How many speakers do you have?
6. Do you want to use the visual sources other than the main 

zone?

y

Since there are many possible ways to connect and use this unit in a multi-zone 
configuration, we recommend that you consult with your nearest authorized Yamaha 
dealer or service center for the planning and setup of the multi-zone system that best 
meet your requirements.

In the following instruction, following system configuration is the 
example. When you use this system configuration, you can enjoy 
7.2-channel playback in the main zone and 2-channel playback in 
the optional two zones. You can also enjoy 5.2-channel playback in 
the main zone and 2-channel playback in the optional three zones.

First, plan the total multi-zone system with this unit 
carefully.

Wire cables between rooms and connect the component 
and speakers to this unit.

Once you have finished the connections, turn on this unit 
and then set the parameters in “Multi Zone” menu (see 
page 91).

– Use “Zone SP Assign” to designate the speaker 

terminals on this unit to each zone.

– Use “Zone2 Set”, “Zone3 Set”, or “Zone4 Set” 

parameters to set the volume settings and other 
functions in each zone.

Pre-amplifier mode
If you want use the external amplifiers for the all channels in the 
main zone, you can use all the speaker terminals on this unit for 
Zone 2, Zone 3, and/or Zone 4 (Pre-amplifier mode). Set 
“PREAMP MODE” to “ON” in the advanced setup (see 
page 120).