Bang & Olufsen 8002 Manual De Usuario

When you have finished setting 
up the loud speakers as described 
on the following pages, connect 
the entire system to the mains 

supply. The indicator lights up 

in red, indicating that the loud­

speakers are in standby, ready to 
be used. The loud speakers are 

designed to be left in this 

stand by mode when not in use. 

Switching on and off – 
indicator 
When you switch on your Bang & 
Olufsen system, the loudspeakers 
switch on simultaneously. The red 
standby indicator light turns green, 
indicating that the loudspeakers 
are switched on. 

When you switch off your system, or 
mute the sound, the red indicator 

light appears immediately, 
indicating that the loud speakers 
are not in use. 

If the loudspeakers are connected 

to a non­Bang & Olufsen system, 
they switch on when they receive a 

signal from the system (refer to 
p. 6). They switch off a few 
minutes after the signal has 
disappeared.

The loudspeakers are equipped 

with a thermal protection system 
which prevents overheating. If an 
error occurs – or the speaker units 
 become overheated – the system 
automatically switches the loud­
speakers to standby, and the 
 indicator light turns orange. 

> Disconnect the loudspeakers 

from the mains. 

> Allow the system time to reset 

(approximately 3–5 minutes). 

> Reconnect the loudspeakers to 

the mains.  

Cleaning the loudspeaker 
Wipe dust off the surfaces using a 

dry, soft cloth. If necessary, remove 
stains or dirt with a soft, damp cloth 
and a solution of water and mild 
detergent such as washing­up 
liquid. 

3