JVC KD-R516 Manual De Usuario

3

Repeat step 2 if necessary.
• To return to the previous menu, press BACK.
• To exit from the menu, press DISP or MENU.

Initial: Underlined

• DEMO ON

• DEMO OFF

:  Display demonstration will be activated automatically if 

no operation is done for about 20 seconds.

: Cancels.

[ 1:00 ]

:  Adjust the hour, then the minute.

—

:  For settings, see “Storing your own sound mode” on 

page 2.

• DIMMER ON
• DIMMER OFF

:  Dims the display and button illumination.
: Cancels.

SCROLL *

1

• SCROLL ONCE
• SCROLL AUTO
• SCROLL OFF

:  Scrolls the displayed information once.
:  Repeats scrolling (at 5-second intervals).
: Cancels.

Pressing DISP for more than one second can scroll the display regardless of 
the setting.

• TAG ON

• TAG OFF

:  Shows the Tag information while playing MP3/WMA 

tracks.

: Cancels.

SSM *

2

•  SSM 01 – 06
•  SSM 07 – 12
•  SSM 13 – 18

:  For settings, see page 2.

MONO *

2

• MONO ON

• MONO OFF

:  Activate monaural mode to improve FM reception, but 

stereo effect will be lost. (See page 2.)

:  Restore the stereo effect.

• AUTO

• WIDE

:  Increases the tuner selectivity to reduce interference 

noises between adjacent stations. (Stereo effect may be 
lost.)

:  Subject to interference noises from adjacent stations, 

but sound quality will not be degraded and the stereo 
effect will remain.

:  For settings, see the right column.

DISP ZONE
Display zone

• BUTTON ZONE
• DISP ZONE

:  For settings, see the right column.

• ON

• OFF

:  Changes the display and buttons (except for EQ/BASS-TRE 

/ DISP) illumination during menu, list search and 
playback mode operations.

: Cancels.

FADER *

3

R06 – F06 [ 00 ]

:  Adjust the front and rear speaker output balance.

BALANCE *

4

L06 – R06 [ 00 ]

:  Adjust the left and right speaker output balance.

• LOUD ON

• LOUD OFF

:  Boost low and high frequencies to produce a well-

balanced sound at a low volume level.

: Cancels.

VOL ADJ –05 — 
VOL ADJ +05
[ VOL ADJ 00 ]

:  Preset the volume adjustment level of each source 

(except FM), compared to the FM volume level. The 
volume level will automatically increase or decrease 
when you change the source.

  • Before making an adjustment, select the source you 

want to adjust.

  • “VOL ADJ FIX” appears on the display if “FM” is selected 

as the source.

• SUB.W

• REAR

:  Select if the REAR LINE OUT terminals are used for 

connecting a subwoofer (through an external amplifier).

:  Select if the REAR LINE OUT terminals are used for 

connecting the speakers (through an external amplifier).

SUB.W FREQ *

5

• LOW
• MID

• HIGH

:  Frequencies lower than 72 Hz are sent to the subwoofer.
:  Frequencies lower than 111 Hz are sent to the 

subwoofer.

:  Frequencies lower than 157 Hz are sent to the 

subwoofer.

SUB.W LEVEL *

5

:  Adjust the subwoofer output level.

[ SUB.W 04 ]

• BEEP ON
• BEEP OFF

:  Activates the keypress tone. 
:  Deactivates the keypress tone.

AMP GAIN *

6

• LOW POWER

• HIGH POWER

:  VOLUME 00 – VOLUME 30 (Select if the maximum power 

of each speaker is less than 50 W to prevent damaging 
the speakers.)

:  VOLUME 00 – VOLUME 50

AM *

7

• AM ON
• AM OFF

: Enable “AM” in source selection.
: Disable “AM” in source selection.

AUX IN *

8

• AUX ON
• AUX OFF

: Enable “AUX IN” in source selection.
: Disable “AUX IN” in source selection.

*

1 

*

2 

*

3 

*

4 

*

5 

*

6 

*

7 

*

8 

[Hold]

You can select your preferred color for buttons illumination (except for EQ/BASS-TRE / DISP) and display color 
separately.

or

] <COLOR> ] <BUTTON ZONE> / <DISP 
ZONE> / <ALL ZONE>
• Pressing COLOR in step 1 will enter zone 

selection menu (BUTTON ZONE /DISP ZONE 
/ ALL ZONE) directly.

] Select your preferred color from one of the 
29 preset colors or <USER> color.

Button zone

All zone

Display zone

[Hold]

Repeat steps 2 and 3 to select a different zone 
and your preferred color.
• If <ALL ZONE> is selected in step 2, the 

buttons and display illumination changed 
to the current/selected <BUTTON ZONE> 
color.

  You can also change the <ALL ZONE> color 

to one of your preferred color by performing 
step 3.

or

] Exit from the setting.

or

] <COLOR SETUP> ] <DAY COLOR> ] 
<BUTTON ZONE>
• Pressing COLOR in step 1 will enter zone 

selection menu (BUTTON ZONE / DISP 
ZONE) directly.

] Select a primary color.
RED 

j GREEN j BLUE j (back to the 

beginning)

[Hold]

] Adjust the level of the selected primary 
color.
00 to 31

Repeat steps 3 and 4 to adjust other primary 
colors.

or

] Exit from the setting.

If “00” is selected for all the primary colors (as in step 
4) for <DISP ZONE>, nothing appear on the display.

You can create your own colors for <DAY COLOR> and <NIGHT COLOR> to apply to button zone and display 
zone.
• <DAY COLOR> 

Displayed when <DIMMER> is set to <DIMMER OFF>.

• <NIGHT COLOR>  Displayed when <DIMMER> is set to <DIMMER ON>.

COLOR 
SETUP

DAY COLOR

• BUTTON ZONE

Follow example below.

• DISP ZONE

Press BACK after step 5, then select DISP ZONE in step 2.

NIGHT COLOR

• BUTTON ZONE

Press BACK after step 5, then select NIGHT COLOR in step 2.

• DISP ZONE

Ex.: Creating <USER> color for <BUTTON ZONE> in <DAY COLOR>.

[Hold]

EN_KD-R514[UI]_1.indd   3

EN_KD-R514[UI]_1.indd   3

11/30/09   10:51:17 AM

11/30/09   10:51:17 AM