IBM 21Y Manual De Usuario
Symptom-to-FRU index
143
176, 177, 178
(Security hardware
error)
(Security hardware
error)
1. Run Configuration/Setup
2. System Board
184
(Power-on
password
corrupted)
(Power-on
password
corrupted)
1. Run Configuration/Setup
2. System Board
185
(Drive startup
sequence
information
corrupted)
(Drive startup
sequence
information
corrupted)
1. Run Configuration/Setup
2. System Board
186
(Security hardware
control logic failed)
(Security hardware
control logic failed)
1. Run Configuration/Setup
2. System Board
187
(VPD serial number
not set.)
(VPD serial number
not set.)
1. Set serial number in Setup
2. System Board
188
(Bad EEPROM
CRC #2)
(Bad EEPROM
CRC #2)
1. Run Configuration/Setup
2. System Board
189
(Three attempts
were made to
access the server
with invalid
passwords)
(Three attempts
were made to
access the server
with invalid
passwords)
1. Run Configuration/Setup,
enter the administrator
password
password
2. System Board.
201
(Memory test error,
see "Memory
Settings" on page
36.) If the server
does not have the
latest level of BIOS
installed, update
the BIOS to the
latest level and run
the diagnostic
program again.
(Memory test error,
see "Memory
Settings" on page
36.) If the server
does not have the
latest level of BIOS
installed, update
the BIOS to the
latest level and run
the diagnostic
program again.
1. Run memory diagnostics.
2. DIMM
3. System Board
229
(Cache error)
(Cache error)
1. Microprocessor
2. Optional microprocessor (if
installed)
1. Run Configuration/Setup, if
disabled by user
2. Disabled DIMM, if not disabled
by user.
Error
Code/Symptom
FRU/Action