3com DSA-3CV1100-02 Manual De Usuario
![3com](https://files.manualsbrain.com/attachments/960452ff43b9899cbcffced60c87abf956e7967a/common/fit/150/50/f6ac125d7af2cf40fec58935fa6d4bf71457a57efe50bee91208a434f325/brand_logo.jpeg)
102
M
ANAGING
THE
VCN A
CCESS
C
ONCENTRATOR
The gateway that appears is the current gateway. To change the gateway,
type the new gateway and press <Enter>.
type the new gateway and press <Enter>.
To avoid changing the gateway, only press <Enter>.
The menu in
re-appears. To change the network parameters
again, type
1
and press <Enter>.
To save new network parameters:
1 Type
0
and press <Enter>.
The question appears:
Do you want to save changes? Y/N [N]
2 To
■
Save changes, type
y
and press <Enter>.
The messages appear:
The IP parameters were saved in a non-volatile memory.
The changes will take effect after reset
Press ENTER to continue ...
After the user resets Port 1 or the agent, the modified network
parameters take effect.
parameters take effect.
■
Discard changes, type
n
and press <Enter> n.
Close Telnet Session
Since Telnet sessions are used in remote network management, it is
possible for local and remote central management sessions to be active
simultaneously.
possible for local and remote central management sessions to be active
simultaneously.
To close a Telnet session, type
3
in the Agent Configuration Menu, and
press <Enter>.
If a Telnet session does not exist, the message appears:
There isn’t any opened Telnet session
If a Telnet session exists, the message appears:
This will close the currently opened Telnet session