Viewsonic CD4225 Manual De Usuario

ViewSonic CD4225

12

CAUTION: DO NOT ATTEMPT TO INSTALL THE LCD MONITOR BY YOURSELF. Installation of your 

LCD monitor must be done by a qualified technician. Contact your dealer for more information.

CAUTION: MOVING OR INSTALLING THE LCD MONITOR MUST BE DONE BY TWO OR MORE 

PEOPLE. Failure to follow this caution may result in injury if the LCD monitor falls.

CAUTION: Do not mount or operate the monitor upside down, face up, or face down.

CAUTION: Do not install the LCD monitor where it will be exposed to direct sunlight, as this will result in 

display defects.

IMPORTANT:

Lay the protective sheet, which was wrapped around the LCD monitor when it was packaged, beneath 

the LCD monitor so as not to scratch the panel.

To protect the connected equipment, turn off the main power before making connections.

Refer to your equipment user manual.

The power outlet socket should be 

installed as near to the equipment as 

possible, and should be easily accessible.

Fully insert the prongs into the power 

outlet socket. Loose connection may 

cause noise.

NOTE:

• Please refer to “Safety Precautions, 

Maintenance & Recommended Use” 

section of this manual for proper 

selection of AC power cord.

• This LCD monitor has no power switch. 

When installing the LCD monitor, 

incorporate a readily accessible 

disconnect device in the fixed wiring, or connect the power cord to socket-outlet which must be 

provided near the LCD monitor and easily accessible. If a fault should occur during operation of the 

unit, operate the disconnect device to switch the power supply off, or disconnect the power cord.

When connected to a computer, switch on the power of the computer first.

Display the signal on the external equipment you wish.

Make adjustments lowering or raising the volume as required.

Make adjustments to the display position or settings if required.

Make adjustments to brightness or contrast if required.

To reduce the risk of “image persistence”, please adjust the following items based on the application 

being used: “Power Save“ and “Image Retention“.

CD4225 can be installed in portrait position, under the following conditions:

• Portrait position is effective only when wall-mounted or ceiling-mounted.

• The stands (legs) can not be fitted to the monitor in portrait position.