Viewsonic CD4225 Manual De Usuario

ViewSonic CD4225

14

Lay the protective sheet on a table, which was wrapped around the monitor when it was packaged, 

beneath the screen surface so as not to scratch the screen face.

This device cannot be used or installed without the Tabletop Stand or other mounting accessory. Failure 

to follow correct mounting procedures could result in damage to the equipment or injury to the user or 

installer. Product warranty does not cover damage caused by improper installation.

Failure to follow these recommendations could result in voiding your warranty.

Use M6 mounting screws (having a length 10-15mm longer than the thickness of the mounting bracket) 

and tighten them securely. (Recommended torque: 470 - 635N•cm). The mounting interface should 

comply with the UL1678 standard in North America. The mounting means should strong enough to bear 

the weight of the monitor (approx. 24.5kg without stand). ViewSonic recommends using mounting 

interface that comply with TÜV-GS standard.

Caution:

For preventing the monitor from falling.

• Install the monitor with metal brackets for wall or ceiling installation (commercially available) on your 

own responsibility. For detailed procedures of installation, refer to the instructions of the metal 

brackets.

• To lessen the probability of injury and damage resulting from fall of the monitor in case of earthquake 

or other disaster, be sure to consult the bracket manufacturer for installation location.

• To lessen the risk of falling of the monitor, thread commercially available rope (having a load capacity 

at least 1960N (200kgf)) through the handles at the right and left of the monitor and secure the rope to 

the wall mount brackets or ceiling mount brackets.

• Do not sleep where the monitor may topple over or fall in case of an earthquake or other disaster.

400mm

200mm

200mm

LCD monitor

10-15mm

Thickness of the 

mounting bracket