Husqvarna 966451906 Manual De Usuario

20

 - English

A worn chain catcher must always be replaced with 

a new one. Always use original spare parts.

Release the brake by moving the front hand guard 

backward.

Loosen the bar nuts and remove the clutch cover, 

chain and bar.

Remove the chain catcher and replace it with a 

new one.

Make sure that the vibration element is fitted cor-

rectly on the crankcase when a new chain catcher 

is screwed in place. See figure 13.

Safety equipment

Remove the cylinder cover and air filter. Dismantle 

the air filter holder. See the “Dismantling the carbu-

rettor” chapter.

Loosen screw B and dismantle the stop control A. 

See figure 14. Unhook the rubber collar around the 

control from the guide plugs.

Clean and check carefully all components. Parts 

must be replaced if cracked or show signs of other 

defects. Always use original spare parts.

Fig 13

Fig 14