Land Pride RCR1272 Manual De Usuario
17
Section 4: Operating Procedures
12/15/15
RCR1248, RCR1260 and RCR1272 Rotary Cutter 326-047M
Section 4: Operating Procedures
Operating Checklist
Hazard control and accident prevention are dependent
upon the awareness, concern, prudence and proper
training involved in the operation, transport, storage, and
maintenance of the Rotary Cutter. Therefore, it is
absolutely essential that no one operates the cutter
without first having read, fully understood, and become
totally familiar with the Operator’s Manual. Make sure the
operator has paid particular attention to:
upon the awareness, concern, prudence and proper
training involved in the operation, transport, storage, and
maintenance of the Rotary Cutter. Therefore, it is
absolutely essential that no one operates the cutter
without first having read, fully understood, and become
totally familiar with the Operator’s Manual. Make sure the
operator has paid particular attention to:
•
•
•
•
•
•
Also make sure the operator has completed the
Operating Checklist below before using the cutter.
Operating Checklist below before using the cutter.
Safety Information
!
DANGER
!
DANGER
!
DANGER
Tractor PTO shield and gearbox shaft shield must be secured
in place when operating cutter to avoid injury or death from
entanglement in driveline.
in place when operating cutter to avoid injury or death from
entanglement in driveline.
!
DANGER
Operating Checklist
✔ Check
Page No.
Make sure all guards and shields are in place.
Refer to "Important Safety Information".
Refer to "Important Safety Information".
Read and follow hook-up & preparation instructions.
Refer to "Section 1: Assembly & Set-up".
Refer to "Section 1: Assembly & Set-up".
Read and make all required adjustments.
Refer to "Section 3: Adjustments".
Refer to "Section 3: Adjustments".
Lubricate cutter and driveline as needed.
Refer to "Lubrication Points".
Refer to "Lubrication Points".
Make sure all gearboxes are properly lubricated and
that all oil plugs have been replaced properly.
Refer to Gearbox lubrication.
that all oil plugs have been replaced properly.
Refer to Gearbox lubrication.
Check cutter initially and periodically for loose bolts
and pins. Refer to "Torque Values Chart for Common
Bolt Sizes".
and pins. Refer to "Torque Values Chart for Common
Bolt Sizes".
!
DANGER
!
DANGER
!
DANGER
!
DANGER
!
DANGER
!
WARNING
!
WARNING
!
WARNING
!
WARNING