Scag Power Equipment STT-31BSD Manual De Usuario

Section 6

To adjust the Custom-Cut Baffle height:

1. Place the cutter deck in the transport position.

2. Remove the hardware securing the Custom-Cut

Baffle to the cutter deck. (See Figure 6-8).

-NOTE-

Hardware location used in the illustrations are
for reference only. Location of hardware may
vary depending on cutter deck size.

Figure 6-8. Custom-Cut Baffle

3. Move the Custom-Cut Baffle to desired position.

(See Figures 6-9 through 6-11 for position).

4. Reinstall the mounting hardware as shown. (See

Figures 6-10 though 6-11). Torque hardware to
39ft.lbs.

Figure 6-9. 3" Custom-Cut Baffle Position

Figure 6-11. 4" Custom-Cut Baffle Position

Figure 6-10. 3-1/2" Custom-Cut Baffle Position

2004 CCB

MOUNTING
HARDWARE

2004 CCB - 3" Setting

CARRIAGE BOLT

TOP SET OF HOLES
FOR 3" SETTING

FLATWASHER

ELASTIC STOP
NUT

2004 CCB - 3-1/2" Setting

CARRIAGE BOLT

MIDDLE SET OF HOLES
FOR 3-1/2" SETTING

FLATWASHER

ELASTIC STOP
NUT

2004 CCB - 4" Setting

CARRIAGE BOLT

BOTTOM SET OF HOLES
FOR 4" SETTING

FLATWASHER

ELASTIC STOP
NUT