Cub Cadet SC2400 Manual De Usuario

■ Front Axle Case Oil

IMPORTANT:
●Make sure to use Cub Cadet GEAR LUBE or SAE 

80W-90 gear oil for front axle case oil.

■ Changing the Front Axle Case Oil

Avoid injury:
●When draining away the front axle case oil that 

1. Operate the tractor to warm up the front axle case 

oil.

2. Park the tractor safely.

NOTE: 
●The front axle case contains approximately 2.6 US 

qt (2.5 L) of oil.

●Be sure to change the oil in both right and left front 

axles.

3. Place drain pans underneath the axle drain plugs 

on both sides of the front axle.

4. Remove the axle drain plugs and allow the oil to 

fully drain.

5. Make sure that the oil has fully drained. Dispose 

of waste properly. Reinstall and tighten the drain 
plugs.

6. Remove the dipstick located on the right side of 

the front axle.

7. Add Cub Cadet GEAR LUBE or SAE 80W-90 

gear oil through the fill port to the specified level.

8. Reinstall and tighten the dipstick.
9. Check the front axle case oil level again.

IMPORTANT: Avoid damage.
●Before checking the oil level, allow the oil to settle 

for 1 hour so that the current oil level can be 
accurately checked on the dipstick. Recheck the oil 
level after operating the tractor for several hours.

10.Again, check the axle case oil level.

Capacities

Lubricants

Approximately 2.6 US qt 

(2.5 L)

Cub Cadet GEAR LUBE 

or SAE 80W-90 gear oil 

3014922