Cub Cadet SC2400 Manual De Usuario

Descargar
Página de 133
Sc2400 Operator’s Manual
■ Coolant
Avoid injury:
Fluids released under pressure from the 
cooling system can cause severe burns. 
Pressure build-up in the cooling system can, 
when the radiator cap is removed, cause the 
coolant to gush out explosively.
Stop the engine and allow it to cool off.
Do not remove the radiator cap before the 
radiator and the engine are sufficiently cool 
such that they can be touched with bare hands. 
Carefully loosen the cap to the first stop to 
allow the pressure to be completely released. 
Only then, remove the cap completely.
[The following coolants are recommended]
• High Quality Permanent Type Antifreeze 
(Ethylene Glycol with corrosion and rust inhibitor 
chemicals) 
Before using the coolant, study the instructions and 
data on its container to be sure it is suitable for the 
engine.
Use a conditioned coolant, or before use, add a 
conditioner to the coolant.
Prepare the coolant by mixing 50% antifreeze with 
50% distilled or deionized water, and then pour this 
coolant into the radiator. This coolant is intended not 
only to cool the engine but also to protect the radiator 
against freezing down to a temperature of –34°F (–
37°C).
Follow the instructions on the antifreeze container or 
contact your local Cub Cadet Yanmar dealer for 
technical assistance. NEVER exceed the maximum 
dilution ratio for the coolant. Exceeding the maximum 
dilution ratio can jeopardize effectiveness of the 
coolant.
9. Every 1000 Hours
WARNING