Cub Cadet SC2400 Manual De Usuario

ALWAYS fully release the internal 
hydraulic pressure before 
disconnecting a hydraulic line. 
ALWAYS ensure that all 
connections are tight and all the 

hydraulic lines, pipes and hoses are free from wear 
or damage.

IMPORTANT:
●NEVER operate the 3-point hitch control / cutting 

height adjustment lever before the engine has 
been sufficiently warmed up.

●If the 3-point hitch control / cutting height 

adjustment lever is operated before the engine has 
been warmed up, the hydraulic system can be 
damaged or develop a failure.

●If abnormal hydraulic noise occurs after the 3-point 

hitch has been raised, then misadjustment or failure 
of the hydraulic system should be suspected.
In such a case, immediately stop operation and 
request your local Cub Cadet Yanmar dealer to 
service or repair the tractor.

■ Operating the 3-Point Hitch Control / Cutting Height Adjustment Lever to Raise or 

Use the 3-point hitch control / cutting height 
adjustment lever, when raising or lowering the Mid- 
or Rear-mounted implement.

1. Shift the 3-point hitch control / cutting height 

adjustment lever to the intended position.

2. Adjust the position stop knob to set the lowest 

position of the implement to the desired height.

3014918c