Cal Spas LTR20051000 Manual De Usuario

Every press will move the valve(s) one stop. The LED that is lit will move up (clockwise) to the 
next available position. 

Every press will move the valve(s) one stop. The LED that is lit will move down (counter-
clockwise) to the next available position. 

This button moves the valve(s) to the most extreme positions. The first press will move the valve(s) 
and cause the LED to travel to the top (most clockwise) position. The next press will move the 
valve(s) in the other direction and the LED will move to the bottom (most counter-clockwise) 
position. 

 

Pressing this button will center the valve(s) and the center LED will be lit. 

Air venturis are the smaller knobs located around the top of your spa. They can also be distinguished from 
diverter knobs by the arrows and the words “OFF”, “ON” and “AIR” marked on them (Figure 14). Each one 
will let you add a mixture of air with the jet pressure. This is accomplished by simply rotating the air venturi 
knob to the left (counter-clockwise) to increase the amount of airflow through the jets. To decrease the amount 
of airflow through the jets,  simply rotate the handle to the right (clockwise). 

 

Spas equipped with the Adjustable Therapy System™ (ATS) allow you complete control of the therapy seat 
and/or lounger. This unique system offers convenient operation with its seat side controls,  seven different 
massage modes, and a soothing demo mode -- all at the touch of a button (Figure 15). 

Page 38 

2005 Spa Owner's Manual 

8/1/2005