Cal Spas LTR20051000 Manual De Usuario

Descargar
Página de 120
Operating Your Spa 
Page 40 
2005 Spa Owner's Manual 
8/1/2005
 
mode.  Once the user finds the perfect massage mode, pressing either the UP or DOWN button will stop the 
demo in that massage mode. 
Time Reset Mode 
Pulse mode will normally run for 15 minutes then automatically shut off. For another 15 minute session, press 
the PUMP ON/OFF button and the PULSE MODE button. A green LED will blink and the pump will run on 
high speed mode as part of a 15-minute cool down period. After that, the pump will stop automatically and the 
green LED light on the panel will continue to blink for one minute then shut off automatically. After the second 
fifteen minute session, the system will run through a cool down cycle for up to two hours. In this cool down 
mode, the user will only be able to operate the pump (by again pressing the PUMP ON/OFF button). However, 
the massage mode will remain off until the cool down mode is completed. 
Pulse Mode System 
Pulse mode system will shut off for two hours unless reset by the following procedure. During this time the 
pump will run at a maximum speed. 
•  In the off position, press the PULSE MODE button once. 
•  The green power light will flash to indicate reset. 
Multi-Colored Spa Light Operation 
10 Dramatic Lighting Modes  
Experience each different lighting mode by turning the spa light off and on to change lighting effects: 
•  WHITE:  Pure, bright white 
•  SPECTRUM SLOW DANCE:  Vibrant, slow fade through all colors 
•  SUNBURST:  Yellow and orange color swirl 
•  BLUE:  Clear and brilliant blue 
•  RED:  Radiant and invigorating red 
•  GREEN:  Nature’s lush green 
•  MAGENTA:  Rejuvenating glow of pink, blue and red 
•  TIDAL FADE:  Fade through blues and greens 
•  AFTERBURNER FADE:  Fade through red, orange, pink, yellow & purple 
•  COLOR BURST:  Energetic strobe through all colors 
Operating the Multi-Colored Spa Light 
1.  Turn the spa light on by pressing the LIGHT button on the top-side control panel. 
2.  To filter through the different color choices, press the button on and off. Each time you press the button, you 
advance to the next color. 
3.  To turn the spa light off when not in use,  press the LIGHT button.