Black Box MPSH16-D20-120V Manual De Usuario
OUTLET MANAGED PDU
110
• Email Message: Enables/Disables email notification for this alarm.
(Default = On.)
Note:
The Email Message parameter offers four different options: On, Off,
On (Copy to All Triggers) or Off (Copy to All Triggers). If either of
the "Copy to All Triggers" options is selected, then email notification
for all other alarms will be switched On or Off as indicated by this
parameter. For example, If "Off (Copy to All Triggers)" is selected,
then Email notification will be disabled for all other alarms too.
On (Copy to All Triggers) or Off (Copy to All Triggers). If either of
the "Copy to All Triggers" options is selected, then email notification
for all other alarms will be switched On or Off as indicated by this
parameter. For example, If "Off (Copy to All Triggers)" is selected,
then Email notification will be disabled for all other alarms too.
• Address 1, 2, and 3: These parameters are used to select which of the three
email addresses, defined via the "Email Messages" menu (see Section 5.9.11,)
will receive the email alarm notification messages generated by this alarm.
The Address parameters can be used to select one, or any combination of the
addresses defined via the Email Messages menu. (Default = All On.)
Note:
If Email addresses have been previously defined, then the text
under the parameters will list the current, user defined email
addresses.
under the parameters will list the current, user defined email
addresses.
• Subject: This parameter is used to define the text that will appear in the
"Subject" field for all email notification messages generated by this alarm.
(Default = "Alarm: Over Temperature (Initial)" or "Alarm: Over
Temperature (Critical)".)
• Load Shedding: Provides access to a submenu, which is used to configure
and enable the Load Shedding feature for the Over Temperature alarms.
When Load Shedding is enabled and properly configured, the Outlet
Managed PDU will switch specific, user-selected plugs On or Off whenever
the temperature exceeds the Alarm Set Threshold value. If the Auto
Recovery feature is enabled, the Outlet Managed PDU can also return these
user-selected plugs to their prior status, when the temperature falls below the
Alarm Clear Threshold value. For more information on the Load Shedding
Feature and Auto Recovery, please refer to Section 7.2.1.