Black Box MPSH16-D20-120V Manual De Usuario

CHAPTER 5: Configuration

• Telnet Access: Enables/disables Telnet access. When Telnet Access is "Off,"

users will not be allowed to establish a Telnet connection to the unit.

(Default = On.)

• Telnet Port: Selects the TCP/IP port number that will be used for Telnet

connections. In the Text Interface, this item is defined via a submenu,

displayed when the Telnet Access parameter is selected. (Default = 23.)

• Max. Per Source: The maximum number of Telnet sessions that will be

allowed per user MAC address. (Default = 4.)

Notes:

• In the Text Interface, the "Per Source" parameter is defined via a

submenu of item 21 (Telnet Access) in the Network Parameters
menu.

• After changing the "Max Per Source" parameter, you must log out

of all pre-existing Telnet sessions in order for the new maximum
value to be applied.

• SSH Access: Enables/disables SSH communication. (Default = On.)

• SSH Port: Selects the TCP/IP port number that will be used for SSH

connections. Note that in the Text Interface, this option is defined via a

submenu that is displayed when the SSH Access parameter is selected (item

number 22). (Default = 22.)

• HTTP Access (Web Access): Enables/disables the Web Browser Interface.

When disabled, users will not be allowed to contact the unit via the Web

Browser Interface. (Default = Off.)

• HTTP Port: Selects the TCP/IP port number that will be used for Web Access.

(Default = 80.)

• HTTPS Access: Enables/disables HTTPS communication. For instructions on

setting up SSL encryption, please refer to Section 14. (Default = On.)