Harbor Freight Tools 68526 Manual De Usuario

Item 68526 / 68529        

      Page 11

1.  To start a cold engine, move the Choke to the 

CHOKE position.  

To restart a warm engine, leave the Choke in the 

RUN position. 

 

 

 

 

2.  Open the Fuel Valve. 

 

 

 

 

 

 

 

 

3.  Turn the Engine Switch to ON. 

 

 

 

 

 

 

 

4.  Grip the Starter Handle of the Engine loosely and pull it 

slowly several times to allow the gasoline to flow into the 

Engine’s carburetor. Then pull the Starter Handle gently 

until resistance is felt. Allow Cable to retract fully and 

then pull it quickly. Repeat until the engine starts. 

Note: Do not let the Starter Handle snap back against 

the engine. Hold it as it recoils so it doesn’t 

hit the engine. 

 

 

 

 

5.  Allow the Engine to run for several seconds.  

Then, if the Choke lever is in the CHOKE position, 

move the Choke Lever very slowly to its RUN position. 

NOTE: Moving the Choke Lever too fast could stall the engine.

IMPORTANT:  Allow the engine to run at no load for five minutes with no 

load after each start-up so that the engine can stabilize.