GE PT878GC Manual De Usuario

April 2004

3-12

Installing the Transducers (cont.)

3. Slide the second mounting block to the calculated spacing

plus the initial scale number selected for the first mounting
block. For example:

a. Initial convenient number for the first mounting block =

1 cm or 1 in.

b. Spacing as calculated by the PT878GC = 0.5 in. or 12.5

c. Second mounting block final location = 1 + 0.5 in. = 1.5 in.

or 1 cm + 1.25 cm = 2.25 cm

The overall spacing between yokes should be left edge to left
edge, or right edge to right edge. Figure 3-12 below shows typical
positioning.

Figure 3-12: Top View of V4 Fixture

with Both Transducers

4. In a similar manner, install the second transducer as shown in

Figure 3-12 above.