Alesis 03D Manual De Usuario

Monitor Outputs

Monitor and solo signals are output via the monitor out and phones connections. Mix-
down Solo and Solo in Place modes also work with the stereo outputs.

The MONITOR OUT SOLO/2TR IN switch selects the signal source for the monitor 
out and phones, and should be set to SOLO for monitoring. See Two-track Input on 
page 77 for more information.

Monitor signals are converted to analog using 20-bit 8-times 
oversampling D/A converters, and then output via balanced 
1/4-inch phone jacks with a +4 dB nominal output level. 

The MONITOR OUT LEVEL control is used to adjust the level 
of the monitor out signal.

A pair of stereo headphones can be connected to the PHONES 
stereo (TRS) phone jack. The phones signal is the same as the 
monitor out signal.

The PHONES LEVEL control is used to adjust the level of the 
phones signal.