Roland XV-5080. Manual De Usuario
![Roland](https://files.manualsbrain.com/attachments/0f4c16ad543d01443d705a6df0a922f055403287/common/fit/150/50/3f2e1fe174f8814c1395beda0db29618b95ef95d02ed697f721709eb4377/brand_logo.png)
169
Chapter 6 Creating Rhythm Sets
Chap.6
Settings Common to an
Entire Rhythm Set
Entire Rhythm Set
Setting Procedure:
1. Select the Rhythm Set you wish to use.
2. Press [F1 (Common)].
3. Use [
]/[
]/[
]/[
] to move the cursor to the
parameter you want to set.
4. Turn the VALUE dial or by press [INC]/[DEC], to select
the desired value.
* If you’ve made a mistake, simply press [UNDO]. The value of
the parameter will be restored to what it was when you first
positioned the cursor there.
positioned the cursor there.
5. Press [EXIT] to return to the RHYTHM PLAY page.
A “*” symbol will appear at the left of the Rhythm Set name,
indicating that the settings have been modified.
indicating that the settings have been modified.
fig.06-002.e_70
* If you turn off the power or select another Rhythm Set while
the “*” symbol is displayed, your new Rhythm Set settings
will be lost. If you wish to keep these settings, perform the Save
operation. (p. 194)
will be lost. If you wish to keep these settings, perform the Save
operation. (p. 194)
RHYTHM Common page ([RHYTHM] -
[F1 (Common)])
[F1 (Common)])
fig.06-002a.e_70
Common
Name (Rhythm Name)
You can name a Rhythm Set using up to 12 characters.
Press [
] or [
] to move the cursor, and then create the
name by turning the VALUE dial or pressing the [INC] or
[DEC] buttons to select the desired characters.
[DEC] buttons to select the desired characters.
Available characters/symbols:
space, A-Z, a-z, 0-9, ! " # $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ^
_ ` { | }
_ ` { | }
→ ←
* Pressing the VALUE dial displays the Patch Name window,
in which you can use the following functions.
[F2 (
←
Prev)]: Move back one character.
[F3 (Next
→
)]: Move forward one character.
[F4 (Insert)]: Insert a blank space at the cursor position.
[F5 (Delete)]: Delete the character at the cursor position.
[F6 (OK)]: Confirm the selected name.
[F5 (Delete)]: Delete the character at the cursor position.
[F6 (OK)]: Confirm the selected name.
Level (Rhythm Level)
Range:
0–127
Sets the volume of the Rhythm Set.
* You can specify the level for each using the Tone Level
Output Assign (Rhythm Output Assign)
Specifies the output destination of the entire Rhythm Set.
Available Settings:
MFX:
The Tone is sent into the Multi-effects.
OUTPUT A–D:
The Tone is sent to the selected pair of
OUTPUT A–D jacks.
INDIV 1–8:
The Tone is sent to the selected INDIVIDUAL 1–8
jack.
TONE:
Outputs according to the settings for each Rhythm
Tone.
Tempo
Clock Source (Rhythm Clock Source)
The M-FX changes and phrase loop (break beats) can be
synchronized to a clock, or tempo. The Clock Source setting
selects the timing reference to be used by the Rhythm Set.
synchronized to a clock, or tempo. The Clock Source setting
selects the timing reference to be used by the Rhythm Set.
Available Settings:
RHYTHM:
The Rhythm Set Tempo will be used.
SYSTEM:
The global System Tempo or clock messages
received from an external sequencer will be used.
Tempo (Rhythm Tempo)
Range:
20–250
When Clock Source (Rhythm Clock Source) is set to
“RHYTHM,” this setting value is effective.
“RHYTHM,” this setting value is effective.
* Clock messages for the Rhythm Tempo are not transmitted
from the MIDI OUT connector.
One Shot Mode
Switch (One Shot Mode Switch)
Range:
OFF/ON
This causes all the samples assigned to a selected Rhythm
Tone in Loop mode (p. 175) played all together (One Shot).
Tone in Loop mode (p. 175) played all together (One Shot).
* This function cannot be used with internal waves, and waves
on Wave Expansion Boards.
* Loop mode settings cannot be changed for individual samples.