Roland MC-09 Manual De Usuario

The MC-09 offers four effects: 

, 

, 

, and 

. You can 

select one of these and apply it to the external input or a loop.

fig.4-1**_80

Press the [EFFECTS] button.

Hold down the [SHIFT] button and press the [LINE IN] button 
to specify whether the effect will be applied to the external 
input.

[LINE IN] button indicator lit: The effect will be applied to the external input

[LINE IN] button indicator blinking: The effect will not be applied to the 
external input

Hold down the [SHIFT] button and press the [SEL] button of a 
part to specify whether the effect will be applied to that part.

[SEL] button indicator lit: Apply the effect to the part

[SEL] button indicator blinking: Don’t apply the effect to the part

It is not possible to apply 
an effect if you’ve selected 
a pattern from the LEAD, 
BASS, or RHYTHM groups. 
To obtain the same result, 
you can capture the pattern 
playback and then apply an 
effect.

The effect routing will be 
remembered until you turn 
off the power.

When you press the 
[EFFECTS] button for the 
first time after turning on 
the power, the effect will be 
applied to the external 
input and to all parts.