Roland MC-09 Manual De Usuario

Press the [EFFECTS] button so its indicator lights.

The effect will be turned on.

To turn off the effect, press the [EFFECTS] button to make the 
indicator blink.

You can use the 

 to rapidly switch the effect on/off, as 

is sometimes done in a DJ performance.

Make sure that the [EFFECTS] button's indicator is lit or blinking.

If it is not lit or blinking, press the [EFFECTS] button.

Hold down the [SHIFT] button and press the [EFFECTS] button.

The effect will be on while you hold down both buttons.

Continue to hold down the [SHIFT] button, and release the 
[EFFECT] button to turn the effect off. If you release the 
[SHIFT] button and then release the [EFFECT] button, the 
effect will remain on.

When using an effect, you can have the effect settings change along with the 
performance. Such a group of effect settings are called an 

. The 

MC-09 contains 30 effect patterns for immediate use. You can also create your 
own effect patterns and save them in internal memory or on a memory card.

:

 Modify the brightness

:  Boost/cut specific frequency regions

:  Modulate the sound

:

 Intermittently cut the sound

Press the [EFFECTS] button.

Make sure that the display indicates an effect pattern number.

Also make sure that none of the BPM, OCT, or TONE/TYPE indicators are 
lit. If one of these indicators is lit, press the [DISPLAY] button several times, 
until the indicator goes out.

The effect on/off setting 
will be remembered until 
you turn off the power.