Yamaha 01V96i Manual De Usuario
Dithering Digital Outputs
15
01V96i—Reference Manual
Ana
log
I/
I/
O
& Di
git
al I/
O
al I/
O
6
COPY
Indicates the status of copy protection information
included in the IEC958 Part2 (S/PDIF-Consumer) for-
mat signals. “OK” appears if copying is allowed. “Pro-
hibit” appears if copy-protected.
Indicates the status of copy protection information
included in the IEC958 Part2 (S/PDIF-Consumer) for-
mat signals. “OK” appears if copying is allowed. “Pro-
hibit” appears if copy-protected.
3.
If you select the SLOT
button for a slot that
has an MY16-AE card installed, use the 01–08
and 09–16 buttons located in the lower-right
corner of the screen to select a channel group
you wish to display.
button for a slot that
has an MY16-AE card installed, use the 01–08
and 09–16 buttons located in the lower-right
corner of the screen to select a channel group
you wish to display.
Dithering Digital Outputs
When digital audio is transferred to lower-resolution systems,
truncated bits may generate unpleasant noise. To cancel the
audible effect of this noise, a small complement of noise is
intentionally added to the digital outputs. This process is
called “dithering.”
On the 01V96i, you can dither the 2TR Digital Outputs and
Slot Outputs. For example, you can apply dithering to the
01V96i stereo mix data and record to a 16-bit digital recorder.
truncated bits may generate unpleasant noise. To cancel the
audible effect of this noise, a small complement of noise is
intentionally added to the digital outputs. This process is
called “dithering.”
On the 01V96i, you can dither the 2TR Digital Outputs and
Slot Outputs. For example, you can apply dithering to the
01V96i stereo mix data and record to a 16-bit digital recorder.
1.
Press the DISPLAY ACCESS [DIO/SETUP] but-
ton repeatedly until the DIO/Setup | Format
page appears.
ton repeatedly until the DIO/Setup | Format
page appears.
The dithering settings are displayed at the bottom of the
page.
page.
2.
Move the cursor to the output or channel to
which you want to apply dithering, then
rotate the Parameter wheel or press the
[INC]/[DEC] buttons to select the value that
matches the resolution of the receiving
device.
which you want to apply dithering, then
rotate the Parameter wheel or press the
[INC]/[DEC] buttons to select the value that
matches the resolution of the receiving
device.
Parameter value
Description
General
Temporarily used
Laser Optical
Laser optical device
D/D Conv
Digital - Digital converter and
signal processing device
signal processing device
Magnetic
Magnetic tape device and mag-
netic disk device
netic disk device
D.Broadcast
Digital broadcast reception
Instruments
Musical instrument, micro-
phone, and sources that gener-
ate string signals
phone, and sources that gener-
ate string signals
A/D Conv
A/D converter (without copy-
right information)
right information)
A/D Conv with (C)
A/D converter (with copyright
information)
information)
Solid Memory
Solid memory device
Experimental
Experimental device
Unknown
Unknown
Note:
“AES/EBU” appears in the Category row when you are
monitoring IEC958 Part 3 (AES/EBU-Professional) format
signals (that do not include Category Code Bit).
signals (that do not include Category Code Bit).
Note:
•
•
You cannot apply dithering to outputs or channels that are
set to “OFF.”
set to “OFF.”
•
Dithering is effective only when the resolution of the
receiving device is lower than that of the 01V96i.
receiving device is lower than that of the 01V96i.
Tip:
To copy the currently-selected setting to all channels,
double-click the [ENTER] button. The copy confirmation
window is displayed.
window is displayed.