Yamaha 01V96i Manual De Usuario
Fading Scenes
71
01V96i—Reference Manual
Sc
ene
M
e
e
m
o
ries
Fading Scenes
You can specify the time it takes the Input and Output Chan-
nel faders (or level controls) to move to their new positions
when a Scene is recalled. This is called Fade Time, and it can
be set for each channel in the range of 00.0 through 30.0 sec-
onds (in 0.1 second steps). You can set the Fade Time for each
Scene individually or for all Scenes globally.
nel faders (or level controls) to move to their new positions
when a Scene is recalled. This is called Fade Time, and it can
be set for each channel in the range of 00.0 through 30.0 sec-
onds (in 0.1 second steps). You can set the Fade Time for each
Scene individually or for all Scenes globally.
Fading Input Channels
To set the Fade Time for Input Channels 1–32 and ST IN
Channels 1–4, press the DISPLAY ACCESS [SCENE] button
repeatedly until the Scene | In Fade page appears. Move the
cursor to the desired channel parameter box, then rotate the
Parameter wheel or press the [INC]/[DEC] buttons to modify
the Fade Time setting.
Channels 1–4, press the DISPLAY ACCESS [SCENE] button
repeatedly until the Scene | In Fade page appears. Move the
cursor to the desired channel parameter box, then rotate the
Parameter wheel or press the [INC]/[DEC] buttons to modify
the Fade Time setting.
1
Global Fade Time
When this check box is checked, a Scene is recalled using
the currently-specified Fade Time. (The Fade Time set-
ting stored in the recalled Scene is temporarily ignored.)
This check box setting works in unison with the Out Fade
page.
When this check box is checked, a Scene is recalled using
the currently-specified Fade Time. (The Fade Time set-
ting stored in the recalled Scene is temporarily ignored.)
This check box setting works in unison with the Out Fade
page.
2
ALL INPUT CLEAR
This button resets all channel Fade Times on the page to
00.0 second.
This button resets all channel Fade Times on the page to
00.0 second.
3
INPUT CH1–32/ST IN 1–4
These parameters enable you to set the Fade Time for
each Input Channel in the range of 00.0 through 30.0 sec-
onds. The Fade Time setting for one channel in a pair
works in unison with its partner.
These parameters enable you to set the Fade Time for
each Input Channel in the range of 00.0 through 30.0 sec-
onds. The Fade Time setting for one channel in a pair
works in unison with its partner.
Fading Output Channels
To set the Fade Time for the Output Channels (Stereo Out,
Bus Outs 1–8, Aux Outs 1–8), press the DISPLAY ACCESS
[SCENE] button repeatedly until the Scene | Out Fade page
appears.
The basic operation is the same as on the In Fade page.
Bus Outs 1–8, Aux Outs 1–8), press the DISPLAY ACCESS
[SCENE] button repeatedly until the Scene | Out Fade page
appears.
The basic operation is the same as on the In Fade page.
1
BUS1–8
These parameters enable you to set the Fade Time for
each Bus Out (1–8) in the range of 00.0 through 30.0 sec-
onds.
These parameters enable you to set the Fade Time for
each Bus Out (1–8) in the range of 00.0 through 30.0 sec-
onds.
2
AUX1–8
These parameters enable you to set the Fade Time for Aux
Outs 1–8.
These parameters enable you to set the Fade Time for Aux
Outs 1–8.
3
STEREO
This parameter enables you to set the Fade Time for the
Stereo Out.
This parameter enables you to set the Fade Time for the
Stereo Out.
4
INPUT MASTER A–H
These parameters enable you to set the Fade Time for
Input Fader Group Master A–H.
These parameters enable you to set the Fade Time for
Input Fader Group Master A–H.
5
OUTPUT MASTER Q–T
These parameters enable you to set the Fade Time for
Output Fader Group Master Q–T.
These parameters enable you to set the Fade Time for
Output Fader Group Master Q–T.
Tip:
•
•
If you operate a fader while fading channels, the fader’s Fade
Time setting is temporarily ignored.
Time setting is temporarily ignored.
•
You can copy the currently-selected Input Channel Fade Time
to all Input Channels by double-clicking the [ENTER] button
to display a window for copying. This is convenient when you
wish to set the Fade Time for all channels simultaneously.
to all Input Channels by double-clicking the [ENTER] button
to display a window for copying. This is convenient when you
wish to set the Fade Time for all channels simultaneously.
1
2
3
Tip:
You can copy the currently-selected Output Channel Fade
Time setting to all Output Channels by double-clicking the
[ENTER] button.
[ENTER] button.
3
2
5
4
1