Behringer V-AMP 3 Folleto

Descargar
Página de 5
Page 3 of 5
In Live Mode 3, you can send the left 
output to an amp’s effects return for onstage 
volume, while the right output sends signal 
to the main mixer for inclusion in the main 
house mix.
Also note that you can press the TAP key 
while turning the GAIN knob to adjust the 
input sensitivity to match the output of 
your guitar’s pickups. If the CLIP LED lights, 
the input's sensitivity should be reduced.
Veni, MIDI, Vici
The V-AMP 3 comes fully equipped to fit 
right into a MIDI (Musical Instrument Digital 
Interface) setup. It can be controlled in real 
time from a computer, or via a MIDI foot 
controller during a live performance. Its MIDI 
connectors are international-standard 5-pin 
DIN connectors. You will need dedicated 
MIDI cables (not included).
The MIDI IN jack receives MIDI controller 
data. It can be adjusted in EDIT mode by 
pressing the A button and then using the 
arrow keys. MIDI OUT/THRU sends data to 
a computer. You can transmit both preset 
data and parameter changes. Some people 
even use the V-AMP as a remote control for 
parameters of their DAW or VST instruments, 
which is more handy than using the mouse 
alone. If set to MIDI THRU, the V-AMP 3 
does not send its own MIDI information, 
but passes on the signal received at the 
MIDI IN connector.
So much sound, so little hassle
It’s hard enough finding another virtual 
guitar amplifier with this much versatility, let 
alone one as economical as the V-AMP3. This 
go-anywhere, do-anything wonder will leave 
you reeling in your own creativity, with cash 
to spare for other gear you’ll need along the 
way to becoming a sonic titan both live and 
in your home studio.
Continued on next page
Computer Recording
B3031A
UCA222
USB Audio Interface
XENYX 502
HPS3000
Laptop
V-AMP3
Live Setup (Mode 3)
VT30FX
XENYX1222USB
MAIN OUT
FCB1010
V-AMP3
FS112V
VIRTUAL 
AMPLIFICATION
V-AMP 3