Fujitsu DL7400 Manual De Usuario

 

 

For an IBM PC or compatible device, use the following MS-DOS 
MODE commands to set the computer serial settings to match the 
printer factory settings: 

 

MODE COM1:9600,N,8,1,P 
MODE LPT1:=COM1 

 

To activate these settings whenever you turn the computer on, write the 
MODE commands in your AUTOEXEC.BAT file. Make sure that the 
MODE.COM file is included in your root directory. 

 

 

If the printer still doesn’t work, consult your dealer or 
someone experienced in serial interface communications. 

•  If an error occurs during printing with Windows, simply 

printing the page again will cause the printed characters to 
be garbled. To avoid this problem, execute reset from the 
control panel or turn off the printer, then print the page 
again. 

 

You are now finished setting up and testing the printer. To familiarize 
yourself with everyday printer operations, such as loading paper, 
selecting print features, and printing, see Chapters 3 and 4. 

 

A printer driver is required for using the printer in a Windows 
environment.  Special printer drivers for Windows 95, 98, Me, NT 4.0, 
2000, XP, and Server 2003 are provided with the DL7400 printer. 

For information about how to install printer drivers, refer to Readme.txt 
of the printer driver to be installed. 

- 

These printer drivers run with DLP24C+ emulation. Be sure to 
specify DLP24C+ emulation for the printer mode. 

- 

The DL7400 printer driver is a printer driver for monochrome 
printing. 

The color data printing result may differ from its print preview 
or the monochrome data printing result.