Fujitsu DL7400 Manual De Usuario

3

This chapter explains how your printer uses paper. 

Topics covered are: 

• Selecting 

paper 

•  Overview of paper operations 
•  Adjusting for paper thickness 
•  Using single sheets 
•  Using continuous forms (front-tractor feed and rear-tractor feed) 
•  Feeding and positioning paper 
•  Switching paper types 

Tips for paper handling are given at the end of this chapter. Check that 
section if you are using multipart forms, envelopes, or labels. 

 

The printer can handle either single sheets or continuous forms. Single 
sheets, also called cut sheets, include envelopes and noncontinuous, 
multipart forms. Continuous forms include labels and multipart forms fed 
into the printer using the forms tractors. 

For best results, use paper that meets the specifications listed below.  
(See Appendix B for detailed specifications.) If you are unsure of the 
suitability of a particular paper, try testing the paper or consult your 
dealer. 

Length 

Single sheets: 70 to 420 mm (3 to 16.5 in) 

Continuous forms: 102 mm (4 in) or greater 

Width 

Single sheets: 55 to 420 mm (2.16 to 16.5 in) 

Continuous forms: 102 to 420 mm (4 to 16.5 in) 

Thickness 

0.57 mm (0.022 in) maximum total thickness. 

Copies 

1 to 8-copies (Paper table/Front/Rear tractor) 

1 to 5-copies (Cut sheet feeder)