OKI CX3641 MFP Manual De Usuario

The fax board requires firmware server version 

1.1 or higher. See “Version:” under Server Info 

in the CX3641 MFP Configuration printout.

1 Fax Board

4 Ferrite Core

2 Screws (3)

5 FCC Label

3 Telephone cord

1. Press and hold the 

SHUTDOWN/RESTART button 

on the printer control panel, 

and wait for the shutdown 

process to complete. 

2. Turn off the scanner (on/off switch is on the 

back right), then turn off the printer.

3. If the optional finisher is installed, open the 

release latch and pull it away from the printer.

4. Remove the two thumbscrews from the bumper 

brackets holding the printer unit to the stand, 

and gently pull the printer out to gain access to 

the back panel.

5. Loosen the two thumb screws (1) and open the 

access door.

6. Insert the fax board into the printer on the 

lower right side.

1