OKI OL610EPS Manual De Usuario

                                                                                                                                                
3.3.7 Lower Base Unit
(1) Remove the upper cover (see 3.3.1).
(2) Remove the connecting cables 4 and 5 of the pulse and main motor from the connectors 2 and 3 of 
the Main Control PCB 1.
(3) Remove the screw 9 from the grounding cable and the metal shield. The screw is located directly 
above CN1 and the 8-pin DIN connector for the second feeder/multi-purpose feeder.
(4) Remove the connector 6 of the LED head from the Main Control PCB 1.
(5) Remove seven screws 7, then remove the lower base unit 8.

Use care when lifting the lower base unit. Do not deform the ground clip 10 for the second sheet 

feeder.

OKI OL600/610ex (96-01-18