Samsung SCX-4X26 Manual De Usuario

Getting started_ 25

This program is for the network IP setting using the MAC address which is 

the hardware serial number of the network printer card or interface. 

Especially, it is for the network administrator to set several network IPs at 

the same time. 

Insert the driver CD provided along with your machine. When the driver 

CD runs automatically, close the window.

Start Windows Explorer and open the X drive. (X represents your CD-

ROM drive.)

Double click Application > SetIP.

Double click Setup.exe to install this program. 

If necessary, select a language from the drop-down list.

Follow the instruction on the window to complete the installation.

Print the machine's network information report which includes your 

machine’s MAC address. See "Printing reports" on page 57.

From the Windows Start menu, select All Programs > Samsung 
Network Printer Utilities

 > SetIP > SetIP.

Click

 

 in the SetIP window to open the TCP/IP configuration window. 

Enter the network card's MAC address, IP address, subnet mask, 

default gateway, and then click Apply.

Click OK, then the machine prints the network information. Confirm all 

the settings are correct.

Click Exit to close the SetIP program.

You have to install the machine software for printing. The software includes 

drivers, applications, and other user friendly programs. 

Make sure that the network setup for your machine is completed. (See 

"Setting up the network" on page 24.) All applications should be closed 

on your computer before beginning installation.

Insert the Printer Software CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation window 

appears. 

If the installation window does not appear, click Start > Run. Type 

X:\Setup.exe, replacing “X” with the letter which represents your drive 

and click OK.

If you use Windows Vista, Windows 7 and Windows Server 2008 R2, 

click Start > All Programs > Accessories > Run, and type 

X:\Setup.exe.

If the AutoPlay window appears in Windows Vista, Windows 7 and 

Windows Server 2008 R2, click Run Setup.exe in Install or run 
program

 field, and click Continue in the User Account Control 

window.

Click Next.

•

If necessary, select a language from the drop-down list.

•

You can only use SetIP program when your machine is connected 

to a network.

•

The following procedure is based on the Windows XP operating 

system. 

•

If you are in a non-static IP address environment and need to 

setup a DHCP network protocol, go to the 

, select the 

program Bonjour for Windows due to your computer operating 

system, and install the program. This program will allow you to fix 

the network parameter automatically. Follow the instruction in the 

installation window. This program does not support Linux.

When you enter the MAC address, enter it without colon(:).

•

The following procedure is for when the machine is being used as 

a network machine. If you want to connect a machine with a USB 

cable, refer to Software section.

•

The following procedure is based on the Windows XP operating 

system. The procedure and popup window which appear during 

the installation may differ depending on the operating system, the 

printer feature, or the interface in use.