Samsung SCX-4X26 Manual De Usuario

Getting started

Select Typical installation for a network printer, and then click Next.

 

The list of machines available on the network appears. Select the printer 

you want to install from the list and then click Next.

 

•

If you do not see your machine on the list, click Update to refresh the 

list, or select Add TCP/IP Port to add your machine to the network. 

To add the machine to the network, enter the port name and the IP 

address for the machine.

To verify your machine’s IP address or the MAC address, print a 

Network Configuration page. (See "Printing reports" on page 57.)

•

To find a shared network printer (UNC Path), select Shared Printer 
[UNC]

 and enter the shared name manually or find a shared printer 

by clicking the Browse button.

After the installation is finished, a window appears asking you to print a 

test page and to register yourself as a user of Samsung machines in 

order to receive information from Samsung. If you desire, select the 

corresponding checkbox(es) and click Finish.

After installation is complete, you may want to set the machine's default 

settings. Refer to the next section if you would like to set or change values.

The print quality is affected by atmospheric pressure, which is determined 

by the height of the machine above sea level. The following information will 

guide you on how to set your machine to the best print quality or best quality 

of print.
Before you set the altitude value, find the altitude where you are using the 

machine.

Ensure that you have installed the printer driver with the provided     

Printer Software CD.

Double-click the Smart Panel icon on the Windows task bar (or 

Notification Area in Linux). 

You can also click Smart Panel on the status bar in Mac OS X.

Click Printer Setting.

Click Setting > Altitude Adjustment. Select the appropriate value from 

the dropdown list, and then click Apply. 

To change the language that appears on the control panel, follow these 

steps:
1.

Press Menu until System Setup appears on the bottom line of the 

display and press OK.

Press OK when Machine Setup appears.

Press the left/right arrow until Language appears and press OK.

Press the left/right arrow until the language you want appears and press 
OK

.

Press Stop/Clear to return to ready mode.   

If you are not sure of the IP address, contact your network 

administrator or print network information. (See "Printing 

•

If your machine does not work properly after the installation, try 

to reinstall the printer driver. See Software section.

•

During the printer driver installation process, the driver installer 

detects the location information for your operating system and 

sets the default paper size for your machine. If you use a 

different Windows location, you must change the paper size to 

match the paper you usually use. Go to printer properties to 

change the paper size after installation is complete. 

If your machine is connected to a network, SyncThru Web 
Service

 screen appears automatically. Click Machine Settings > 

 (or Machine Setup) > Altitude adj.. Select the appropriate 

altitude value, and then click Apply.

0