Samsung SCX-5835NX Manual De Usuario

Media and tray_ 36

11.

media and tray

This chapter provides information on how to load originals and print media into your machine.

•

•

•

•

•

•

•

•

  

•

Do not load paper smaller than 142 x 148 mm (5.6 x 5.8 inches) or 

larger than 216 x 356 mm (8.5 x 14 inches).

•

Do not attempt to load the following types of paper, in order to prevent 

paper jam, low print quality, machine damage.

-

Carbon-paper or carbon-backed paper

-

Coated paper

-

Onion skin or thin paper

-

Wrinkled or creased paper

-

Curled or rolled paper

-

Torn paper

•

Remove all staples and paper clips before loading.

•

Make sure any glue, ink, or correction fluid on the paper is completely 

dry before loading.

•

Do not load originals that include different sizes or weights of paper.

•

Do not load booklets, pamphlets, transparencies, or documents with 

other unusual characteristics.

You can use the scanner glass or the automatic document feeder to load an 

original for copying, scanning, and sending a fax.

Make sure that no originals are in the document feeder. If an original is 

detected in the document feeder, the machine gives it priority over the 

original on the scanner glass. To get the best scan quality, especially for 

colored or gray-scaled images, use the scanner glass.

1. Lift and open the scanner lid.

2. Place the original face down on the scanner glass. And align it with the 

registration guide at the top left corner of the glass.

3. Close the scanner lid.

•

Leaving the scanner lid open while copying may affect copy 

quality and toner consumption.

•

Dust on the scanner glass may cause black spots on the 

printout. Always keep it clean. (See "Cleaning the scan unit" on 

•

If you are copying a page from a book or magazine, lift the 

scanner lid until its hinges are caught by the stopper and then