Samsung SF-560 Manual De Usuario

T

ROUBLESHOOTING

Copies are too light or too dark.

Use the Darkness button to darken or lighten the 
background of the copies.

Smears, lines, marks or spots 
appears on copies.

• If defects are on the original document, press the Darkness 

button to lighten the background of your copies.

• If no defects are on the original document, clean the scan 

unit. See page 5.4.

Copy image is skewed.

• Ensure that the original document is positioned correctly in 

the ADF (Automatic Document Feeder).

• Check that the copy paper is loaded correctly.

Blank copies print out.

Ensure that the original document is face down in the ADF.

Image rubs off the copy easily.

• Replace the paper in the paper tray with paper from a new 

package.

• In high humidity areas, do not leave paper in the machine for 

the extended periods of time.

Frequent copy paper jams 
occurs.

• Fan the stack of paper, then turn it over in the paper tray. 

Replace the paper in the tray with a fresh supply. Check/
adjust the paper guides, if necessary.

• Ensure that the paper is the proper paper weight. 75g/m

2

 

(20 lb) bond paper is recommended.

• Check for copy paper or pieces of copy paper remaining in 

the machine after a paper jam has been cleared.

Fewer copies from the toner 
cartridge than expected prints 
out.

• Your original documents may contain pictures, solids or 

heavy lines. For example, they may be forms, newsletters, 
books or other documents that use more toner. 

• The machine may be turned frequently on and off.

The machine is not working, 
there is no display and the 
buttons are not working.

• Unplug the power cord and plug it in again. 
• Ensure that there is power to the electrical receptacle.

No dial tone sounds.

• Check that the phone line is connected properly.
• Check that the phone socket in the wall is working by plugging 

in another phone.

The numbers stored in the 
memory do not dial 
correctly.

Make sure that the numbers are stored in the memory 
correctly. Print a Phonebook list, referring to page 2.15.

The document does not feed 
into the machine.

• Make sure that the document is not wrinkled and you are 

putting it in correctly. Check that the document is the right size, 
not too thick or thin. 

• Make sure that the control panel is firmly closed.