Samsung CLX-6250 Manual De Usuario

Supplies and accessories_ 3

skin. 

When you open the front door and work inside the machine, it is 

highly recommend that you remove the paper transfer belt first. 

Because the work you do could contaminate the paper transfer 

belt.

3. Remove the new toner cartridge from its bag. 

•

Don't use sharp objects, such as a knife or scissors, to open the 

print cartridge package. You could damage the surface of the 

print cartridge. 

•

To prevent damage, do not expose the print cartridge to light for 

more than a few minutes. Cover it with a piece of paper to 

protect it if necessary.

4. Slowly shake the cartridge five or six times to distribute the toner evenly 

inside the cartridge. It will assure maximum copies per cartridge. 

5. Place the print cartridge on a flat surface, as shown, and remove the 

paper covering the print cartridge by removing the tape.

•

If toner gets on your clothing, wipe it off with a dry cloth and wash 

clothing in cold water. Hot water sets toner into fabric.

•

Do not touch the surface, the OPC drum in the cartridge. If the 

surface is contaminated, it might affect the printout quality. Use 

the handle on the cartridge to avoid touching this area. 

6. Hold the toner cartridge by the handle and slowly insert the cartridge into 

the opening in the machine. Ensure the color cartridge is placed in the 

correct position, see label in picture below for the correct color position 

for each cartridge.
Tabs on the sides of the cartridge and corresponding grooves within the 

machine will guide the cartridge into the correct position until it locks into 

place completely.

7. Close the front door. Make sure that the cover is securely closed. 

If the front door is not completely closed, the machine will not 

operate. 

After the life span of the paper transfer belt is complete, you have to replace 

it.

•

The transfer belt-related message appears on the display, telling it's 

time for a replacement. 

•

The Smart Panel program window appears on the computer telling you 

the paper transfer belt needs to be replaced. 

The life span of the paper transfer belt may be affected by operating 

environment, printing interval, media type, and media size.

1. Open the front door.

If you leave the front door open for more than a few minutes, the 

OPC drum in the toner cartridge can be exposed to light. This will 

cause damage to the OPC drum. Close the front door should the 

installation need to be halted for any reason.

2. Press the green release handle to release the paper transfer belt. 

Holding the handle on the paper transfer belt, lift it out of the machine.

3. Remove a new paper transfer belt from its bag. 
4. Remove the paper covering the paper transfer belt. 

•

Do not use sharp objects, such as a knife or scissors, to open the 

paper transfer belt package. You could damage the surface of