Samsung CLX-6250 Manual De Usuario

Supplies and accessories_ 5

1. Turn the machine off and unplug all cables from the machine.
2. Remove the screws and remove the rear cover.

3. Remove the screws, then lift up the cover slightly and pull the cover to 

the right.

4. Remove the new memory module from its bag. 
5. Holding the memory module by the edges, align the memory module in 

the slot at about a 30-degree angle. Make sure that the notches of the 

module and the grooves on the slot fit each other.

The notches and grooves illustrated above may not match those 

on an actual memory module and its slot.

6. Press the memory module into the slot with care until you hear a 'click'. 

Do not press the memory module strongly or the module may be 

damaged. If the module does not seem to fit into the slot properly, 

carefully try the previous procedure again.

7. Install the control board with the screw removed in step 3. 
8. Install the rear cover with the screw removed in step 2.
9. Reconnect the power cord and printer cable, and turn the machine on.

If you use the PS driver, you must activate the added memory in the 

PS driver properties 
(See "Activating the added accessories in printer properties" on 

page 4).

•

You can only use this feature if you have installed the 512 MB 

optional memory. (CLX-6250 Series only)

•

After installing the optional memory, you can use advanced printing 

features, such as proofing a job and specifying of printing a private 

job in the printer properties window.

This option allows you to choose how to print the printing file by using 

the 512 MB optional memory. 
1.Open the document you want to print.
2.Select Print from the File menu. The Print window appears. 
3.Select your printer driver from the Select Printer list.

The basic print settings including the number of copies and print 

range are selected within the Print window. 

4.Access Printing Preferences (See "Opening printing preferences" on 

page 2).

5.Click the Advanced tab then select Job Settings.
6.Select the Print Mode you want .

•

Normal:  This mode prints without storing your document in the 

optional memory. 

•

Proof:  This mode is useful when you print more than one copy. 

You can print one copy first to check, than print the rest of copies 

later. 

•

Confidential:  This mode is used for printing confidential 

documents. You need to enter a password to print. 

7.Select OK.

All of the print jobs waiting to be printed are listed in the active job queue 

in the order you sent them to the printer. You can delete a job from the 

queue before printing, or promote a job to print sooner.
1.Press Menu on the control panel.
2.Press left/right arrow until Job Management appears and press OK.
3.Press left/right arrow until Active Job appears and press OK.
4.Press left/right arrow until the user’s name and file name you want to 

use appears and press OK.

If the select file is a confidential print job, enter the specified 

4-digit password.
Use the left/right arrow to enter digits. When you press OK, the 

cursor will move to the next character. When you finish 

entering the password, press OK.