Samsung CLX-6250 Manual De Usuario

Supplies and accessories_ 8

-

Open System: Authentication is not used, and encryption may 

or may not be used, depending on the need for data security. 

Enter the WEP Key using number keypad after selecting 

Open System and then press OK.

-

SharedKey: Authentication is used. A device that has a proper 

WEP Key can access the network. Enter the WEP Key using 

number keypad after selecting SharedKey and then press 

OK.

•

WPA-PSK or WPA2-PSK: You can select WPA-PSK or 

WPA2-PSK to authenticate the print server based on WPA 

Pre-Shared Key. This uses a shared secret key (generally called 

Pre Shared Key passphrase) which is manually configured on 

the access point and each of its clients.
a. Press OK when WPA-PSK or WPA2-PSK appears on the 

bottom line of the display.
b. Press the up/down arrow to select TKIP or AES in Encryption 

and press OK. If you select WPA2-PSK, press the up/down 

arrow to select AES or TKIP + AES in Encryption and press 

OK.
c. Enter the WPA Key using number keypad and press OK.

5.When you have finished, press Stop/Clear to return to the ready 

mode. If you do not know about your wireless environment, please 

ask the network administrator.

Disconnect the network cable (standard or crossover). Your 

machine should then start communicating wirelessly with the 

network. In case of Ad-hoc mode, you can use a wireless LAN and 

wired LAN simultaneously.

Now go to "Installing network connected machine’s driver" on page 3.

For information about configuring and using the machine on a wireless 

network environment, refer to the Wireless network install guide 

provided with the wireless network interface card. You can also 

configure the network parameters on the SyncThru™ Web Service.

Installing the hard disk allows the data from your computer to be sent to the 

print queue of the printer hard disk. This decreases the workload of the 

computer. You can also use various print features, such as storing a job in 

the hard disk, proofing a job, and printing private documents.
The order information is provided for optional hard disk (See "Available 

accessories" on page 2).

1. Turn the machine off and unplug all cables from the machine.
2. Remove the screws and remove the rear cover.

3. Remove the screws, then lift up the cover slightly and pull the cover to 

the right.

4. Take out a new hard disk from its plastic bag.
5. Align the connector on the hard disk with the connector on the control 

board. Push the hard disk in until it is latched into place.

6. Fasten down the hard disk with the screws supplied with your new hard 

disk; then reinstall the covers removed in steps 2 and 3.

7. Reconnect the power cord and machine cable. Turn on the machine.
8. You must activate the added hard disk in the driver properties

(See "Activating the added accessories in printer properties" on page 4).

After installing the optional hard disk, you can use advanced printing 

features, such as storing or spooling a print job to the hard disk, 

proofing a job, and specifying of printing a private job in the printer 

properties window.
Once you have stored files in the hard disk, you can easily print or 

delete the stored files using the control panel of your printer.

You can store jobs on the hard disk.
1.Open the document you want to print.
2.Select Print from the file menu. The Print window appears. 
3.Select your machine from Select Printer list. 
4.Click Properties or Preferences.
5.Click the Advanced tab and click Job Setting.
6.Select the print mode you want from the drop-down list

(See "Using help" on page 3).

7.Enter the user’s name and file name.
8.Click OK until the Print window is displayed.
9.Click OK or Print to start printing.

You can print or delete jobs stored on the hard disk.