Samsung CLX-6250 Manual De Usuario

Network setup_ 6

Installation procedure is common for all variants of UNIX OS mentioned 

(See "UNIX" on page 3).
1.From the Samsung website, download and unpack the UNIX Printer 

Driver package to your computer.

2.Acquire root privileges. 

3.Copy appropriate driver archive to the target UNIX computer.

See administration guide of your UNIX OS for details.

4.Unpack the UNIX printer driver package archive.

For example, on IBM AIX use the following commands.
cd /tmp
gzip –dc /cdrom/unix/packages/aix_power/aix_power.tar.gz | tar 

–xvf –
The “binaries” folder consists of binz, install, share files and folders

5.Copy the “binaries” folder to any local folder.
6.Change to the driver’s “binaries” directory.

7.Run the install script.

./install
install is the installer script file which is used to install or uninstall the 

UNIX Printer Driver package.
Use “chmod 755 install” command to give the permission to the 

installer script.

8.Execute the “. /install –c” command to verify install results.
9.Run ‘installprinter’ from the command line. This will bring up the Add 

Printer Wizard window. Setup the printer in this window referring the 

procedure next.

On some UNIX OS, for example on Solaris 10 just added 

printer may not be enabled and/or may not accept jobs. In this 

case run the following two commands on the root terminal:
accept <printer_name>
enable <printer_name>

The uninstalling printer utility should be used to delete the printer 

installed in the system.

a)

Run “uninstallprinter” command from the terminal.

It will open the Uninstall Printer Wizard
The installed printers are listed in the drop-down list

b)

Select the printer to be deleted.

c)

Click Delete to delete the printer from the system.

d)

Execute the “. /install –d” command to uninstall the whole 

package.

e)

To verify uninstall results, execute the “. /install –c” command.

To reinstall it again, use the command “. /install” to reinstall the binaries.

To add the printer to your UNIX system, run ‘installprinter’ from the 

command line. This will bring up the Add Printer Wizard window. Setup 

the printer in this window according to the following steps:
1.Type the name of the printer.
2.Select appropriate printer model from model list.
3.Enter any decsription corresponding to the type of the printer in the 

Type field. This is optional.

4.Specify any printer description in the Description field. This is 

optional.

5.Specify printer location in the Location field.
6.Type the IP address or DNS name of the printer in the Device textbox 

for network-connected printers. On IBM AIX with jetdirect Queue 

type only DNS name is possible, numeric IP address is not allowed.

7.Queue type shows the connection as lpd or jetdirect in the 

corresponding list box. Additionally usb type is available on Sun 

Solaris OS.

8.Select Copies to set the number of copies.
9.Check the Collate option to receive copies already sorted.
10.Check the Reverse Order option to receive copies in the reverse 

order.

11.Check the Make Default option to set this printer as default.
12.Click OK to add the printer.

TCP/IPv6 is supported properly only in Windows Vista or higher.

If the IPv6 network seems to not be working, set all the network setting 

to the factory defaults and try again (See "Restoring factory default 

settings using SyncThru™ Web Service" on page 3).

To use the IPv6 network environment, follow the next procedure to use the 

IPv6 address:
1. Connect your machine to the network with a network cable.
2. Turn on the machine.
3. Print a Network Configuration Report from the machine’s control 

panel that will check IPv6 addresses.

a)

Press Menu on the control panel.

b)

Press the up/down arrow to highlight Network and press OK.

c)

Press the up/down arrow to highlight Network Info. and press 

OK.

4. Select Start > Control Panel > Hardware and Sound > Printers > Add 

Printer.

5. Click Add a local printer on the Add Printer windows.
6. Follow the instruction on the window.

If the machine does not work in the network environment, activate 

IPv6. Refer to the next section followed by.

1. Connect your machine to the network with a network cable.
2. Turned on the machine.
3. Press Menu on the control panel.
4. Press up/down arrow to highlight Network and press OK.
5. Press up/down arrow to highlight TCP/IP (IPv6) and press OK.
6. Press up/down arrow to highlight IPv6 Activate and press OK.
7. Press up/down arrow to highlight On and press OK.

On is set as a default.

8. Turn the machine off and turn it on again.
9. Print a Network Configuration Report from the machine’s control 

panel that will check IPv6 addresses.

1.

Press Menu on the control panel.

2.

Press up/down arrow to highlight Network and press OK.

3.

Press up/down arrow to highlight Network Info. and press OK.