Samsung CLX-6250 Manual De Usuario

Network setup_ 7

Machine supports following IPv6 addresses for network printing and 

managements.

•

Link-local Address: Self-configured local IPv6 address. (Address starts 

with FE80.)

•

Stateless Address: Automatically configured IPv6 address by a 

network router.

•

Stateful Address: IPv6 address configured by a DHCPv6 server.

•

Manual Address: Manually configured IPv6 address by a user.

If you have a DHCPv6 server on your network, you can set one of the 

following option for default dynamic host configuration:
1.Press Menu on the control panel.
2.Press up/down arrow to highlight Network and press OK.
3.Press up/down arrow to highlight TCP/IP (IPv6) and press OK.
4.Press up/down arrow to highlight DHCPv6 Config and press OK.
5.Press up/down arrow to access the required value.

•

Routers: Use DHCPv6 only when requested by a router.

•

DHCPv6 Addresses: Always use DHCPv6 regardless of router 

request.

•

DHCPv6 Off: Never use DHCPv6 regardless of router request.

6.Press OK.

1.Start a web browser such as Internet Explorer that supports IPv6 

addressing as a URL (See "Connecting SyncThru™ Web Service" 

For IPv4, enter the IPv4 address (http://xxx.xxx.xxx.xxx) in the 

address field and press the Enter key or click Go.

2.Click Login on the upper right of the SyncThru™ Web Service 

website.
A log-in page appears. 

3.Type in the ID and Password then click Login .

If it’s your first time logging into SyncThru™ Web Service, type in the 

below default ID and password.

•

ID:  admin 

•

Password:  sec00000 

4.When the SyncThru™ Web Service window opens, click Settings > 

Network Settings.

5.Click TCP/IPv6.
6.Enable the Manual Address In the TCP/IPv6 section.

IPv6 Protocol should enable.

7.Select the Address / Prefix and click the Add button, then the router 

prefix will automatically be entered into the address field. 
Enter the rest of address. (ex: 3FFE:10:88:194::AAAA. “A” is the 

hexadecimal 0 through 9, A through F.)

8.Click the Apply button.

Driver installation for network printer in IPv6 network environment is same 

as TCP/IPv4 (See "Installing network connected machine’s driver" on 

page 3).
Select TCP/IP Port and when the list of machines are displayed, simply 

select your machine's IPv6 address.

1. Start a web browser such as Internet Explorer that supports IPv6 

addressing as a URL .

2. Click Go to access the SyncThru™ Web Service.
3. Click Login on the upper right of the SyncThru™ Web Service website.

A log-in page appears. 

4. Type in the ID and Password then click Login .

If it’s your first time logging into SyncThru™ Web Service, type in the 

below default ID and password.

•

ID:  admin 

•

Password:  sec00000 

5. Select one of the IPv6 addresses (Link-local Address, Stateless 

Address, Stateful Address, Manual Address) from Network 

Configuration Report.

6. Enter the IPv6 addresses. (ex: http://[FE80::215:99FF:FE66:7701]) 

Address must be enclosed in '[]' brackets.