Samsung CLX-6250 Manual De Usuario

Scanning_ 2

1. Load originals face up into the document feeder, or place a single 

original face down on the scanner glass
(See "Loading originals" on page 1).

2. Press 

 (Scan/Email) on the control panel. 

3. Press the up/down arrow to highlight Scan To Email and press OK.

If you registered My Log in ID, Password and checked Local 

Authentication in User Access Control on SyncThru™ Web 

Service, Login Name and Enter Password appear. Enter the 

Auth ID and Password to your machine. Go to step 5.

4. When From: appears on the top line of the display, enter the sender’s 

email address and press OK.

5. When Destination Email: appears on the top line of the display, enter 

the recipient’s email address and press OK.

6. To enter additional addresses, press the left/right arrow to highlight Yes 

and press OK.
To continue to the next step, press the left/right arrow to highlight No 

and press OK.

7. If the displays asks if you want to send the email to your account, press 

the left/right arrow to highlight Yes or No and press OK.

This prompt does not appear if you have activated the Auto Send 

To Self option in the Settings > Scan > Scan To E-mail on 

SyncThru™ Web Service.

8. Enter an email subject and press OK.
9. Press the up/down arrow until the file type you want is highlighted and 

press OK.
When you have finished, select No when Another Page? appears.
The machine begins scanning and then sends the email.

While the machine is sending an email, you cannot use the 

machine to copy or to send a fax.

10. Press the Stop/Clear to return to ready mode.

You can set up Address Book with the email addresses you use frequently 

via SyncThru™ Web Service and then easily and quickly enter email 

addresses by entering the location numbers assigned to them in Address 

Book.

This method means that you store email addresses on your machine’s 

memory. You can add addresses, as well as group them in particular 

categories.

1.Turn your networked computer on and open the web browser. 
2.Enter your machine's IP address as the URL in a browser.
3.Click Go to access the SyncThru™ Web Service.
4.Click Login on the upper right of the SyncThru™ Web Service 

website.
A log-in page appears. 

5.Type in the ID and Password then click Login.

If it’s your first time logging into SyncThru™ Web Service, type in the 

below default ID and password.

•

ID:  admin 

•

Password:  sec00000 

6.Click Address Book > Individual.
7.Click Add.
8.When the Add screen appears, select the Speed No. number and 

enter e-mail address and fax number.

If you need to set SMB or FTP sever information, check SMB 

or FTP and set the information. 

9.Click Apply.

1.Turn your networked computer on and open the web browser. 
2.Enter your machine's IP address as the URL in a browser.
3.Click Go to access the SyncThru™ Web Service.
4.Click Login on the upper right of the SyncThru™ Web Service 

website.
A log-in page appears. 

5.Type in the ID and Password then click Login.

If it’s your first time logging into SyncThru™ Web Service, type in the 

below default ID and password.

•

ID:  admin 

•

Password:  sec00000 

6.Make sure you have configured individual address book.
7.Click Address Book > E-mail Group .
8.Click Add Group.
9.When the Add Group screen appears, select the Speed No. number 

and enter Group Name.

You can easily add individual address if you check Yes for Add 

individual(s) after this group is created.

10.Click Apply.

There are two ways to search for an address in memory. You can either 

scan from 0 to 199 sequentially or search by entering the first letters of 

the name associated with the address.

1.Press 

 (Scan/Email) and Address Book on the control panel.

2.Press the up/down arrow to highlight Search & Dial and press OK.