Samsung CLX-6250 Manual De Usuario
Scanning_ 4
Samsung Scan and Fax Manager > Quick Scan.
Scanning originals and sending via SMB/FTP
(Scan to server)
You can scan an image and send it to a total of five destinations via the
SMB or FTP.
Setting up an FTP server
To use an FTP server, you need to set up parameters to access the FTP
servers using SyncThru™ Web Service.
1. Turn your networked computer on and open the web browser.
2. Enter your machine's IP address as the URL in a your web browser.
3. Click Go to access the SyncThru™ Web Service.
4. Click Login on the upper right of the SyncThru™ Web Service website.
1. Turn your networked computer on and open the web browser.
2. Enter your machine's IP address as the URL in a your web browser.
3. Click Go to access the SyncThru™ Web Service.
4. Click Login on the upper right of the SyncThru™ Web Service website.
A log-in page appears.
5. Type in the ID and Password then click Login.
If it’s your first time logging into SyncThru™ Web Service, type in the
below default ID and password.
•
ID: admin
•
Password: sec00000
6. Click Address Book > Individual.
7. Click Add.
8. Check the box next to Add FTP.
9. Enter the server address in dotted decimal notation or a host name.
10. Enter the server port number, from 1 to 65535.
7. Click Add.
8. Check the box next to Add FTP.
9. Enter the server address in dotted decimal notation or a host name.
10. Enter the server port number, from 1 to 65535.
The default port number is 21.
11. Check the box next to Anonymous if you want the FTP server to permit
access to unauthorized people.
This box is unchecked by default.
This box is unchecked by default.
12. Enter the Login Name and Password.
13. Enter the Path for saving the scanned image.
14. Click Apply.
13. Enter the Path for saving the scanned image.
14. Click Apply.
Setting up an SMB server
To use an SMB server, you need to set up parameters for access to SMB
servers using SyncThru™ Web Service.
1. Turn your networked computer on and open the web browser.
2. Enter your machine's IP address as the URL in a your web browser.
3. Click Go to access the SyncThru™ Web Service.
4. Click Login on the upper right of the SyncThru™ Web Service website.
1. Turn your networked computer on and open the web browser.
2. Enter your machine's IP address as the URL in a your web browser.
3. Click Go to access the SyncThru™ Web Service.
4. Click Login on the upper right of the SyncThru™ Web Service website.
A log-in page appears.
5. Type in the ID and Password then click Login.
If it’s your first time logging into SyncThru™ Web Service, type in the
below default ID and password.
•
ID: admin
•
Password: sec00000
6. Click Address Book > Individual.
7. Click Add.
8. Check the box next to Add SMB.
9. Enter the server address in dotted decimal notation or a host name.
10. Enter the server port number, from 1 to 65535.
7. Click Add.
8. Check the box next to Add SMB.
9. Enter the server address in dotted decimal notation or a host name.
10. Enter the server port number, from 1 to 65535.
The default port number is 139.
11. Enter the server address in dotted decimal notation or a host name.
12. Check the box next to Anonymous if you want to permit unauthorized
persons to access the SMB server.
This box is unchecked by default.
This box is unchecked by default.
13. Enter the Login Name and Password.
14. Enter the Domain. If your server is joined to the certain domain, and you
14. Enter the Domain. If your server is joined to the certain domain, and you
are using the domain account to log in, enter the domain name.
Otherwise, just enter your computer name which is registered to the
SMB server.
15. Enter the Path for saving the scanned image. The folder (e.g. Scanned
Images) must be setup on the root and the folder properties need to be
setup as a share, with you listed as having user rights to the folder.
16. Click Apply.
Scanning and sending to SMB/FTP server
1. Make sure that your machine is connected to a network.
2. Load originals face up into the document feeder, or place a single
2. Load originals face up into the document feeder, or place a single
original face down on the scanner glass.
3. Press
(Scan/Email) on the control panel.
4. Press the up/down arrow to highlight Scan To SMB or Scan To FTP,
and press OK.
5. Press the up/down arrow to highlight the server and file share required
then press OK.
6. Press the up/down arrow until the scan format you want is highlighted
and press OK.
The machine begins scanning and then sends the scanned image to the
The machine begins scanning and then sends the scanned image to the
specified server.
Setting authentication for authorized user
If you have connected your machine to a network and set up the network
parameters correctly, you can scan and send images over the network.
To send a scanned image through email or via network server safely, you
To send a scanned image through email or via network server safely, you
must register account information of authorized users to your local machine
using SyncThru™ Web Service.
Registering local authorized users
1. Turn your networked computer on and open the web browser.
2. Enter your machine's IP address as the URL in your web browser.
3. Click Go to access the SyncThru™ Web Service.
4. Click Security > User Access Control > User Authentication.
5. Select Local Authentication in the Authentication Method section.
6. Click Apply.
7. Click OK in the modifying confirmation pop-up window.
8. Click User Profile.
9. Click Add.
10. Enter User Name, Login ID, Password, E-mail Address and Fax
2. Enter your machine's IP address as the URL in your web browser.
3. Click Go to access the SyncThru™ Web Service.
4. Click Security > User Access Control > User Authentication.
5. Select Local Authentication in the Authentication Method section.
6. Click Apply.
7. Click OK in the modifying confirmation pop-up window.
8. Click User Profile.
9. Click Add.
10. Enter User Name, Login ID, Password, E-mail Address and Fax
Number.
You need to enter the registered user ID and password in the machine
You need to enter the registered user ID and password in the machine
when you start scanning to email from the control panel.
11. Click Apply.