Samsung CLX-6250 Manual De Usuario

Machine status and advanced feature_ 1

1.

machine status and advanced feature

This chapter explains how to browse the current status of your machine, and the method of setting for the advanced 
machine setup. Read this chapter carefully in order to use your machine's diverse features.

•

•

•

•

•

•

•

•

•

  

Some menus may not appear in the display depending on options or 

models. If so, it is not applicable to your machine.

Your machine provides you with various user-selectable options for setting 

up the fax system. You can change the default settings for your preferences 

and needs.
To change the fax setup options:

1. Press 

 (Fax) on the control panel.

2. Press Menu on the control panel.
3. Press the up/down arrow to highlight Fax Setup and press OK.
4. Press the up/down arrow until the fax setup item you want is highlighted 

and press OK.

5. Press the up/down arrow until the option you want is highlighted and 

press OK.

6. Press the up/down arrow until the desired status appears or enter the 

value for the option you have selected, and press OK.

7. If necessary, repeat steps 4 through 6.
8. Press Stop/Clear to return to ready mode.

You can specify the number of redial attempts. If 

you enter 0, the machine will not redial.

Your machine can automatically redial a remote 

fax machine if it was busy. You can set an 

interval between attempts.

You can set a prefix of up to five digits. This 

number dials before any automatic dial number 

is started. It is useful for accessing a PABX 

exchange.

This mode helps with poor line quality and 

makes sure any faxes you send are sent 

smoothly to any other ECM-equipped fax 

machine. Sending a fax using ECM may take 

more time.

You can set your machine to print a confirmation 

report showing whether a transmission was 

successful, how many pages were sent, and 

more. The available options are On, Off, and 

On-Error, which prints only when a transmission 

is not successful.

This function allows users to know what fax 

messages have been sent by showing sent 

messages in the transmission report. 
The first page of the message is turned into an 

image file than is printed on the transmission 

report so the users can see what messages 

have been sent.
However, you can not use this function when 

sending fax without saving the data in the 

memory.

This setting may not be available depending on 

your country. If you cannot reach this option, 

your machine does not support this feature.
You can set the dial mode for your machine to 

either tone dialing or pulse dialing. If you have a 

public telephone system or a private branch 

exchnage (PBX) system, you may need to select 

Pulse. Contact your local telephone company if 

you are not sure which dial mode to use.
If you select Pulse, some phone system 

features might not be available. It can also take 

longer to dial a fax or phone number.

You can select the default fax receiving mode. 

For details on receiving faxes in each mode, see 

You can specify the number of times the 

machine rings before answering an incoming 

call.