Samsung CLX-6250 Manual De Usuario

Machine status and advanced feature_ 2

Changing the resolution setting affects the 

appearance of the received document.

•

Standard:  Originals with normal sized 

characters.

•

Fine:  Originals containing small characters 

or thin lines or originals printed using a 

dot-matrix printer.

•

Super Fine:  Originals containing extremely 

fine detail. Super Fine mode is enabled only 

if the machine with which you are 

communicating also supports the Super 

Fine resolution.

•

For memory transmission, Super Fine 

mode is not available. The 

resolution setting is automatically 

changed to Fine.

•

When your machine is set to Super 

Fine resolution and the fax 

machine with which you are 

communicating does not support 

Super Fine resolution, the machine 

transmits using the highest 

resolution mode supported by the 

other fax machine.

•

Photo Fax: Originals containing shades of 

gray or photographs.

You can select the default contrast mode to fax 

your originals lighter or darker.

Sets the image size.

The scan size options may vary between 

document feeder or scanner glass. 

You can set the machine to print a report with detailed information about the 

previous 50 communication operations, including time and dates.
For further details, see "Printing sent fax report automatically" on page 9.

For copy output, you can set up several options in advance.
1. Press 

(Copy) on the control panel. 

2. Press Menu on the control panel.
3. Press the up/down arrow to highlight Copy Setup and press OK.

This option allows the machine to automatically 

print the page number, and the date and time of 

reception at the bottom of each page of a 

received fax.

This code allows you to initiate fax reception 

from an extension phone plugged into the EXT 

socket on the back of the machine. If you pick up 

the extension phone and hear fax tones, enter 

the code. It is preset to *9* at the factory.

When receiving a fax containing pages as long 

as or longer than the paper loaded in the paper 

tray, the machine can reduce the size of the 

original to fit the size of the paper loaded in the 

machine. 
Turn on this feature if you want to automatically 

reduce an incoming page.
With this feature set to Off, the machine cannot 

reduce the original to fit onto one page. The 

original will be divided and printed in actual size 

on two or more pages.

When receiving a fax containing pages as long 

as or longer than the paper in your machine, you 

can set the machine to discard a specific length 

from the end of the received fax. The machine 

will print the received fax on one or more sheets 

of paper, minus the data that would have been 

on the specified discard segment. 
When the received fax contains pages larger 

than the paper in your machine, and Auto 

Reduction has been turned on, the machine will 

reduce the fax to fit on the existing paper, and 

nothing will be discarded.

This setting may not be available depending on 

your country. Using this feature, the system will 

not accept faxes sent from remote stations 

whose numbers are stored in the memory as 

junk fax numbers. This feature is useful for 

blocking any unwanted faxes.
When you turn on this feature, you can access 

the following options to set junk fax numbers.

•

Add:  Allows you to set up to 10 fax 

numbers.

•

Delete:  Allows you to delete the desired 

junk fax number. If you select Delete All, 

Allows you to delete all junk fax numbers.

This setting may not be available depending on 

your country. This mode enables a user to use a 

single telephone line to answer several different 

telephone numbers. In this menu, you can set 

the machine to recognize which ring patterns to 

answer. For details about this feature, see 

"Receiving faxes using DRPD mode" on page 5.

Set this duplex feature to save paper. When the 

machine prints the received fax data, it prints 

them on both sides of the paper. For details 

about this feature, see "Printing received faxes 

This menu only appears when an optional hard 
disk drive (HDD) has been installed. With this 

feature set to On, allows you to store received 

faxes in the common box.