Samsung CLX-8380ND Manual De Usuario
12.20
<Troubleshooting>
Copying problems
Condition
Suggested solutions
Copies are too light
or too dark.
or too dark.
Use Light and Dark arrows to darken or
lighten the backgrounds of copies.
lighten the backgrounds of copies.
Smears, lines,
marks, or spots
appears on copies.
marks, or spots
appears on copies.
• If the defects are on the original, press Light
and Dark arrows to lighten the background
of your copies.
of your copies.
• If there are no defects on the original, clean
the scan unit. (Page 11.2)
Copy image is
skewed.
skewed.
• Ensure that the original is face down on the
scanner glass or face up in the DADF.
• Check that the copy paper is loaded
correctly.
Blank copies print
out.
out.
Ensure that the original is face down on the
scanner glass or face up in the DADF.
scanner glass or face up in the DADF.
Image rubs off the
copy easily.
copy easily.
• Replace the paper in the tray with paper
from a new package.
• In high humidity areas, do not leave paper in
the machine for extended periods of time.
Frequent copy
paper jams occur.
paper jams occur.
• Fan the stack of paper, then turn it over in
the tray. Replace the paper in the tray with a
fresh supply. Check/adjust the paper guides,
if necessary.
fresh supply. Check/adjust the paper guides,
if necessary.
• Ensure that the paper is the proper paper
weight. 75 g/m
2
(20 lb bond) paper is
recommended.
• Check for copy paper or pieces of copy
paper remaining in the machine after a
paper jam has been cleared.
paper jam has been cleared.
Toner cartridge
produces fewer
copies than
expected before
running out of
toner.
produces fewer
copies than
expected before
running out of
toner.
• Your originals may contain pictures, solids,
or heavy lines. For example, your originals
may be forms, newsletters, books, or other
documents that use more toner.
may be forms, newsletters, books, or other
documents that use more toner.
• The machine may be turned on and off
frequently.
• The scanner lid may be left open while
copies are being made.
Scanning problems
Condition
Suggested solutions
The scanner does
not work.
not work.
• Make sure that you place the original to be
scanned face down on the scanner glass, or
face up in the DADF.
face up in the DADF.
• There may not be enough available memory
to hold the document you want to scan. Try
the Prescan function to see if that works. Try
lowering the scan resolution rate.
the Prescan function to see if that works. Try
lowering the scan resolution rate.
• Check that the printer cable is connected
properly.
• Make sure that the printer cable is not
defective. Switch the cable with a known
good cable. If necessary, replace the cable.
good cable. If necessary, replace the cable.
• Check that the scanner is configured
correctly. Check scan setting in the SmarThru
Configuration or the application you want to
use to make certain that the scanner job is
being sent to the correct port.
Configuration or the application you want to
use to make certain that the scanner job is
being sent to the correct port.
The unit scans
very slowly.
very slowly.
• Check if the machine is printing received
data. If so, scan the document after the
received data has been printed.
received data has been printed.
• Graphics are scanned more slowly than text.
• Communication speed slows in scan mode
• Communication speed slows in scan mode
because of the large amount of memory
required to analyze and reproduce the
scanned image. Set your computer to the
ECP printer mode through BIOS setting. It
will help to increase the speed. For details
about how to set BIOS, refer to your
computer user’s guide.
required to analyze and reproduce the
scanned image. Set your computer to the
ECP printer mode through BIOS setting. It
will help to increase the speed. For details
about how to set BIOS, refer to your
computer user’s guide.