Eizo LA-130-D Manual De Usuario

Please contact your local dealer for assistance if any of the listed items are missing or damaged. Use specified
screws for tightening up between arm, fitting and monitor referring to the back of this manual.

zArm
zUser's Manual
zFitting

zArm Cover x 2 pcs
zStand Mounting Cover
zHex-head wrench

zMounting Screws M4 x 8 (black) x 4 pcs 
zMounting Screws M4 x 12 (silver/long) x 4 pcs
zMounting Screws M4 x 8 (silver/short) x 4 pcs*

*Screws for attaching the monitor with fitting to arm when the monitor’s hole spacing is 100 mm x 100 mm. 

zMonitors

Weight Capability*

2.5 kg to 5.5 kg

Hole Spacing

75 mm x 75 mm / 100 mm x 100 mm 
(VESA compatible)

*Weight : Total weight of the monitor including the weight of the 

cables and optional peripherals.

zDesks

Weight Capability

50 kg min. (recommended) 

Thickness and Depth

Refer to right figure

More than 38mm

Desk

20~55mm

100mm

100mm

75mm

75mm

M4

M4

1.

Unfold the arm before affixing the arm to the base.

[LA-130-D] [LA-120-D]

(For packing)

(For mounting)

(For packing)

(For mounting)

2.

Clamp the arm to the edge of the desk.

Fit the holes

Desk

Press against

the desk

(1) Press the desk clamp against the edge of

the desk.

(2) Fit the holes on the base of arm to 

hex-threaded-hole.

(3) Drive two screw holes by turns with 

hex-head wrench.  After clamping the
arm, covering the screw holes with Stand
Mounting cover.

 

zThe arm may not affix firmly to the base if driving either screw in tightly.
zIf attaching the LA-120-D, bend the arm slightly forward in advance. Not doing so may scratch the 

arm by a hex-head wrench.