Eizo LA-130-D Manual De Usuario

3.

Attach the monitor to the arm.

Use specified screws for tightening up between arm, fitting and monitor referring to the back of this 
manual.

<The monitor employing 75 mm x 75 mm arm mounting holes>

(1)

Attach the arm to the monitor with specific screws (M4 x 8 (black) or M4 x 12 (silver/long),
4 points). 

(2)

Put in the covers to the shield plate with sliding them rightward or leftward.

(1)

(2)

 

zAdjust the angle of the monitor to face upward slightly so that the cover can be mounted easily.

<The monitor employing 100 mm x 100 mm arm mounting holes>

(1)

Mount the fitting on the rear of monitor with specific screws (M4 x 8 (black) or M4 x 12
(silver/long), 4 points).

(2)

Hook the monitor with fitting of to the arm.

(3)

Attach the arm to the monitor with fitting by using screws (M4 x 8 (

silver/short),

 4 points). 

(4)

Put in the covers to the shield plate with sliding them rightward or leftward.

(2)

(1)

(3)(4)

 

zAdjust the angle of the monitor to face upward slightly so that the cover can be mounted easily.

4.

Lead the power cord and signal cable into the cable holder at inner side of the arm.

[LA-130-D] [LA-120-D]

Cable Holder

Cable Holder

 

zThe number of cable holder may differ from each model. 
zThe cables are recommended to lead with slight sag for the smooth motion of the monitor for

portrait display.