Nilfisk-Advance America P 130.2 Manual De Usuario

13

Nilfisk P 130.2 / P 150.2 / P 160.2



up carefully.

1. Wind up the electric cable on 

the appropriate hooks. Built-
in clip for good holding.

  The lower hook can be 

turned to release the electric 
cable. 

2. The high pressure washer 

comes in two models: A) with 
hook for storage of high pres-
sure hose (14) - B) with a 
hose reel (13).

Pump, hose and accessories 
should always be emptied of 
water prior to storing as follows:

1. Stop the machine (turn the 

start/stop switch (1) to posi-
tion “O” and detach water 
hose and accessory.

2. Restart the machine and 

activate the trigger. Let the 
machine run until no more 
water runs through the spray 
handle.

3. Stop the machine and un-

plug. Wind the electric cable 
round the hooks placed on 
the side of the machine.

4. Separate spray handle and 

high pressure hose.

5. Machines without hose reel: 

Detach high pres sure hose, 
coil it up and place it on the 
hose storage.

  Machines with hose reel: Coil 

the high pressure hose up on 
the hose reel.

6. Place spray handle, nozzles 

and other ac ces so ries in the 
 holders of the machine.

Should the machine by mistake 
be frozen, it will be necessary 
to check it for damage.

NEVER START-UP A FROZEN 
MACHINE.

The standard accessories 
(spray handle, spray lance,  
nozzles and nozzle cleaning 
tool) can be stored on the pres-
sure washer.

To avoid accidents, the electric 
cable and the high pressure 
hose should always be wound