StorCase Technology DX115 Manual De Usuario

4

Introduction

StorCase Technology, Inc.

DX115 for Backup User's Guide - Rev. A01

(Figure 3)

Carrier

Handle

Key

Lock

Drive Ready/

Error LED

Drive Activity

LED

Power

Switch

Push Here to

Eject Carrier

Fan Error LED

Disable Switch

• Key Lock - This lock prevents unauthorized removal or installation of the carrier.

• Carrier Handle - This handle allows the ejection and installation of the drive carrier.

To eject the carrier, simply push on carrier handle.  Once handle pivots outward, pull han-
dle to remove carrier.

To install the carrier, simply insert the drive carrier into the receiving frame.  Push handle
in to fully seat carrier into the receiving frame.

• Power Switch - This switch allows the drive carrier to be powered OFF/ON at anytime.

Grey power switch indicates SATA 3Gbps DX115 receiving frame.  Blue
power switch indicates SAS DX115 receiving frame.

If the drive is already installed in the receiving frame before a system power up, you do
not have to press and hold the switch to power on the drive.  During system power up,
the drive will automatically spin-up and the Drive Ready LED will flash.  Drive is ready to
be accessed when Drive Ready LED is ON.

It is the responsibility of the user to ensure that the host does not access
the drive while attempting to remove the drive.  Failure to do so may result
in loss of data and/or damage to the drive itself!